Around 5.1 quarts (approximately 4.8 liters) of engine oil are required for a full change with a new filter on the 2013 Hyundai Santa Fe Sport 2.4L.
Engine context and why the number matters
The Santa Fe Sport 2.4L uses Hyundai’s Theta II engine family. Knowing the capacity helps you stock the right amount of oil for a complete change and prevents under- or over-filling, which can affect engine performance and longevity.
Capacity specifics
Before listing the key figures owners should reference when planning an oil change, the core numbers are:
- Engine: 2.4-liter inline-4 Theta II
- Oil capacity (with filter): 5.1 quarts (4.8 liters)
- Recommended oil viscosity: 5W-20 (or as specified in the owner's manual)
- Oil type: Synthetic blend or full synthetic; API SN/GF-5
When performing a full oil change, replace the oil filter and fill to the stated capacity. After adding oil, wait a moment for it to settle, then recheck the level with the dipstick and top up if necessary.
Practical tips for oil changes
For DIY enthusiasts or service shops, these tips help ensure a clean, accurate change:
- Plan to add about 5.1 quarts and verify the level after the oil settles.
- Always replace the oil filter as part of a full change to maintain filtration efficiency.
- Use the recommended viscosity (5W-20) and select a quality API SN/GF-5 certified oil.
Note: If you drive in extreme temperatures or have a VIN with updated manufacturer guidance, consult the owner's manual or a Hyundai dealer for any regional adjustments to oil type or capacity.
Summary
The 2013 Hyundai Santa Fe Sport 2.4L requires about 5.1 quarts of engine oil with a new filter. Use 5W-20 oil unless the manual specifies otherwise, and always confirm the exact specification for your vehicle via the owner's manual or a Hyundai dealer. Regular oil changes with the correct amount help protect the engine and maintain performance.
How many quarts of oil does a 2013 Hyundai Santa Fe Sport 2.4 L take?
How much oil does a 2013 Hyundai Santa Fe Sport need? The 2.4L inline engine typically requires about 4.0–4.5 quarts of oil with a filter change; exact capacity is confirmed during service per OEM specs. We top off to specification and verify with a post-service inspection to ensure correct levels and no leaks.
What kind of oil does a 2013 Hyundai Santa Fe Sport use?
2020 – 2013 Santa Fe / Santa Fe Sport (3rd-Generation)
| Engine | Common Trims | Factory Oil |
|---|---|---|
| 2.4L GDI inline-4 (2013-2020) | SE, SEL, Sport | 5W-30 (preferred) or 5W-20 |
| 2.0L Turbo GDI (2013-2018) | 2.0T Sport | 5W-30 full synthetic |
| 3.3L Lambda-II V6 (2013-2019 XL/3-row) | GLS, Limited, Ultimate | 5W-30 |
How much oil does a Hyundai Santa Fe Sport 2.4 take?
roughly 5 quarts
synthetic), oil volume, and filter type. The 2016 Hyundai Santa Fe Sport with a 2.4L engine uses roughly 5 quarts depending on the service performed.
Can I use 5W-30 instead of 5W20 in my Hyundai?
Yes, you can switch; all you need to do is change the oils.