About 5.7 quarts of engine oil (roughly 5.4 liters) are required for a full oil change on the 2013 Ford Edge with the 3.5-liter V6, including a new filter.
The 2013 Edge uses a 3.5L Ti-VCT V6 engine. Oil capacity figures are published for a complete change with the filter. Variations can occur by engine version or service procedure, so it’s best to confirm with the owner’s manual or your dealer for your VIN-specific specification.
Capacity details and how to use the figure
Ford lists the oil capacity for the 3.5L Edge as 5.7 quarts with a new filter. This means performing a standard oil change with replacement of the filter typically calls for about 5.7 quarts of engine oil. If you’re only topping off or reusing a filter, the amount may vary slightly, so always check the dipstick after filling to reach the correct level.
Practical maintenance tips
When changing the oil, pour in the recommended amount, run the engine briefly to circulate the oil, then turn off and let it settle before checking the level on the dipstick. Recheck and adjust if necessary to stay within the full and safe range on the dipstick.
Summary
The 2013 Ford Edge with the 3.5L V6 generally requires about 5.7 quarts of engine oil (approximately 5.4 liters) for a full oil change with a new filter. Always verify the exact capacity for your vehicle using the owner’s manual or dealer resources, as minor variations can occur.