The 2013 BMW X3 with the 2.0-liter engine generally requires about 6.0 quarts (5.7 liters) of engine oil with a new filter. If you’re not replacing the oil filter, the amount is closer to 5.0 quarts (4.7 liters).
In more detail, the X3 2.0 uses BMW’s turbocharged N20 engine. Official capacity can vary slightly by model year, trim, and whether a new filter is installed during the oil change, so it’s always best to confirm with the owner’s manual or BMW’s service data for your exact VIN.
Oil capacity specifics for the 2013 X3 2.0
The following figures apply to the 2013 X3 models equipped with the 2.0-liter turbocharged engine (N20) and represent typical oil-change scenarios that include replacing the filter.
- Engine oil capacity with the filter installed: 6.0 quarts (5.7 liters)
- Oil capacity without the filter: approximately 5.0 quarts (4.7 liters)
Bottom line: plan for about 6.0 quarts if you’re performing a full oil change with a new filter, and about 5.0 quarts if the filter isn’t being replaced. Always fill to the vehicle’s official dipstick level after the change and consult the manual for the exact specification required for your VIN.
Notes on oil grade and service intervals
For best results, use synthetic oil that meets BMW Longlife-01 specifications. Common grades for this engine include 5W-30 or 0W-40, depending on climate and service conditions. Check the owner’s manual or with a BMW dealer to confirm the exact grade and change interval for your vehicle, as these can vary by region and build date.
Regularly monitoring oil level between changes is advised, and follow BMW’s recommended service intervals to maintain performance and longevity of the N20 engine.
Summary
The 2013 BMW X3 2.0’s oil capacity is about 6.0 quarts (5.7 liters) with a new filter, and roughly 5.0 quarts (4.7 liters) if the filter is not replaced. Use synthetic oil that meets BMW LL-01 specifications (commonly 5W-30 or 0W-40, depending on climate) and verify the exact requirement for your VIN in the owner's manual or with a BMW service professional. This ensures proper lubrication and longevity for the N20 engine.