The engine oil capacity for a 2011 Acura MDX with the 3.7L V6 is about 5.5 quarts with the filter (roughly 5.2 liters).
For context, this model uses a 3.7-liter V6 (engine code J37A). When performing an oil and filter change, you should expect to add roughly 5.5 quarts, with slight variation possible depending on whether the filter is replaced and how much oil remains in the engine after draining. Always confirm by checking the dipstick after filling and refer to the owner's manual for the exact viscosity specification and capacity details.
Oil capacity and specifications for the 2011 MDX 3.7L
Notes before listing the figures
Here are the key figures you should rely on when performing an oil change on this model.
- Capacity (with filter): 5.5 quarts (5.2 liters)
- Recommended oil viscosity: 5W-20 (check the owner's manual for climate-specific guidance)
After adding oil, run the engine for a minute, turn it off, wait a moment, then recheck the level with the dipstick. Add small amounts as needed to reach the proper mark.
Summary
The 2011 Acura MDX with the 3.7L V6 typically requires about 5.5 quarts of engine oil when changing the oil and filter, equivalent to roughly 5.2 liters. Use the recommended viscosity (5W-20) and verify the level with the dipstick after filling. Always consult the owner's manual or service data plate for the exact specification for your vehicle.