About 5.7–6.0 quarts (roughly 5.4–5.7 liters) with the oil filter included; exact capacity depends on the specific 3.6 L V6 variant—check your owner's manual for the precise figure.
Oil capacity for a 3.6 L V6 isn’t universal because there are multiple engine families that share the displacement. In this article, we outline typical capacities for common variants and explain how to confirm the exact amount for your vehicle.
Common 3.6 L V6 variants and their oil capacities
The following figures reflect manufacturer guidance for typical oil changes with a new filter. They serve as a guide; always verify your specific car's spec.
- GM 3.6L V6 (LLT/LFX family): 6 quarts (5.7 L) with filter
- Chrysler 3.6L Pentastar: 5.9 quarts (5.6 L) with filter
- Other 3.6 L variants: general range around 5.5–6.0 quarts (5.2–5.7 L); exact figure depends on the exact engine model and year
Keep in mind that the exact capacity can vary with factors such as oil cooler, oil filter size, and whether you’re performing a standard oil change or a larger service. Always confirm with the official manual for your vehicle.
How to verify the exact capacity for your vehicle
Since capacities vary by engine code and year, use these steps to confirm the precise amount for your car before an oil change.
- Locate your engine code and model year in the owner's manual or on the engine tag under the hood.
- Check the manufacturer’s official specifications for your exact engine variant (GM 3.6L LLT/LFX, Chrysler 3.6L Pentastar, etc.).
- Refer to the vehicle’s service or owner's manual for the stated oil capacity including the filter.
- When in doubt, consult your dealer or a qualified mechanic to confirm the correct amount and oil specification for your model.
By verifying the engine code and model year, you can select the precise oil capacity for an accurate change and avoid under- or overfilling.
Summary
Most 3.6 L V6 engines require about 5.7–6.0 quarts of oil with a filter installed, but the exact capacity depends on the specific engine variant and year. Always verify with your vehicle’s manual and use the correct oil specification for your engine.
How many quarts of oil does a V6 3.6 L take?
For the 2019 RAM 1500, the oil type depends on your engine: the 3.6L V6 uses approximately 6 quarts of 0W-20 full synthetic oil, the 5.7L HEMI V8 uses 7 quarts of 5W-20 full synthetic oil, and the 3.0L EcoDiesel (Gen 2) uses approximately 10.5 quarts of 5W-40 full synthetic diesel oil meeting MS-10902/API CJ-4 ...
How many quarts are in a 3.6 L V6?
The Versatile Choice: 3.6L Pentastar Specs
| Feature | Specification |
|---|---|
| Transmission | 9-Speed (Pacifica) or 8-Speed (300) Automatic |
| Fuel Economy | Up to 30 MPG Highway (Chrysler 300) |
| Towing Capacity | Up to 3,600 lbs (Pacifica w/ Tow Group) |
| Oil Capacity | Approx. 5-6 Quarts (Check Manual) |
Can I drive straight after adding oil?
The Ideal Waiting Time
After adding oil to your car, it's recommended to wait for at least 5 to 10 minutes before starting the engine. This waiting period allows the fresh oil to properly circulate throughout the engine and reach all the vital components that require lubrication.
What is the best oil brand for Jeep?
Jeep Wrangler Oil Type Recommended by the Manufacturer
Jeep recommends its Mopar brand of oil, called MaxPro, for your Jeep Wrangler oil type. Mopar meets the manufacturer's high standards.