About 5 quarts (roughly 4.7 liters) of oil is required for a full oil change on the 2014 Dodge Dart equipped with the 2.4L engine, including a new filter.
What you should know about capacity and oil type
For this engine, the official capacity assumes replacing the oil filter. If you drain the oil without changing the filter, you’ll use slightly less—roughly 4.5 quarts (about 4.3 liters). The recommended oil viscosity is SAE 5W-20, and a synthetic oil or synthetic blend is commonly advised. Always refer to the owner’s manual for the exact specification and verify the level with the dipstick after filling.
Additional considerations
In very cold climates, some owners use 0W-20, but 5W-20 is the standard recommendation for most regions. If you operate under high-mileage or unusual conditions, follow Mopar’s guidance from the manual or consult a dealer for specific recommendations.
Summary
The 2.4L Dodge Dart typically requires about 5 quarts of oil during a full change, with 5W-20 being the common grade. The exact amount can vary slightly if the filter isn’t replaced, so always confirm the level on the dipstick after refilling.