Prices for an oil pan on a 2007 Honda Accord typically range from about $20 to $60 for a used unit, $60 to $150 for aftermarket pans, and $100 to $250 for a new OEM pan. Labor to install can add roughly $150 to $400 depending on the shop and location.
The question covers a wide price spectrum because the cost depends on the source (used, aftermarket, or OEM), the engine type in the car (2.4L I4 or 3.0L V6), and the condition of the pan and related hardware. This article breaks down typical price ranges, installation considerations, and where to shop to help you budget accordingly.
Pricing options
Below are the common price bands you’ll encounter when shopping for an oil pan for a 2007 Honda Accord. The following list reflects typical ranges seen at retailers, salvage yards, and dealers, though exact prices can vary by region and availability.
- Used oil pan: typically $20–$60. Condition can vary; inspect for dents, rust, and thread integrity. Shipping costs may apply if buying online, and some pans require cleaning or straightening before use.
- Aftermarket oil pan: typically $60–$150. Brands like Dorman and other non-OEM suppliers offer these at lower prices; verify compatibility with your engine variant and whether a gasket or hardware kit is included.
- New OEM Honda oil pan: typically $100–$250. Availability and price depend on engine type (2.4L vs 3.0L) and regional pricing; dealerships or OEM parts retailers are common sources.
Conclusion: Cheaper options are usually found in used pans, but buying new OEM parts offers a closer fit and longer reliability. If you’re budget-conscious, aftermarket pans can be a solid middle ground, provided you confirm compatibility and seals.
Installation costs and considerations
Before this list, consider how installation costs are factored. Labor prices vary by shop and region, and the total can shift based on how much disassembly is required and whether any extra parts are needed to complete the job.
- Labor to replace the oil pan: typically $150–$400. Time can range from 1.5 to 3 hours or more depending on access and vehicle condition; some shops bill by the hour.
- Gasket, sealant, and hardware: usually $20–$60. Some kits include the gasket and drain plug; others bill separately.
- Potential additional repairs: if the oil pickup tube seal or surrounding seals are damaged, or if there’s corrosion around the pan, costs can rise.
Conclusion: Expect a total outlay that combines part price plus labor, typically in the ballpark of $170–$650. Higher-end repairs or severely corroded pans can push costs higher.
Where to buy and how to compare prices
Before this list, you should compare sources to ensure you get a good fit and price. The right source depends on your timeline, budget, and warranty needs.
- Major auto parts retailers and online marketplaces: RockAuto, AutoZone, Advance Auto Parts, O'Reilly; compare price, availability, and shipping options. Look for online coupons or member discounts.
- Dealers and OEM parts retailers: typically higher price but a guaranteed fit and sometimes a warranty. Check for core charges and return policies.
- Salvage yards and used parts marketplaces: often the cheapest option; confirm condition and compatibility, and ask about return policies or guarantees when possible.
Conclusion: For best value, compare at least three sources, confirm engine variant compatibility (2.4L I4 vs 3.0L V6), and consider total cost including shipping, tax, and potential core charges.
Summary
For a 2007 Honda Accord, oil pan prices span a wide range: used pans typically cost $20–$60, aftermarket pans $60–$150, and new OEM pans $100–$250. Labor to install usually runs $150–$400, with total project costs often between $170 and $650 depending on part choice, labor rates, and any additional repairs. Verify your engine variant and check multiple sources to secure the best combination of fit, price, and warranty. If you’re unsure about the process, consult a qualified mechanic to avoid damage during replacement.