Prices vary widely depending on the engine variant and source. In practice, you’ll typically see a used long block around $600–$1,200, a remanufactured long block about $1,500–$2,600, and a new OEM engine from a dealer in the $3,500–$5,000+ range, before installation. Labor and additional parts can add several hundred to more than a thousand dollars to the total.
For context, the 2013 Focus offered the standard 2.0-liter Duratec gasoline engine, with the 2.0-liter EcoBoost turbo available in the Focus ST. An electric variant exists as well, which uses an electric motor rather than a traditional internal combustion engine. Prices vary by source, region, and whether the engine is used, remanufactured, or new.
Engine options and compatibility
The typical 2013 Focus lineup includes a 2.0L Duratec gasoline engine as the common non-ST option, plus a 2.0L EcoBoost for the high-performance ST model. There is also a Focus Electric variant that uses an electric motor instead of a traditional engine. When shopping for a replacement, identifying the exact engine code and VIN is essential to ensure compatibility.
Gasoline engines (2.0L Duratec)
Price ranges you can expect for replacing the standard gasoline engine (installed) fall into several tiers:
- Used long-block (no accessories): $600–$1,200
- Remanufactured long-block: $1,500–$2,600
- New OEM engine (dealer): $3,500–$5,000+
- Labor for installation: $600–$1,500
- Auxiliary parts (gaskets, water pump, seals, timing components): $200–$900
Concluding: Total installed cost depends on source, region, and whether you’re exchanging a core. Always verify the exact engine code and VIN compatibility before purchase.
Gasoline engines (2.0L EcoBoost in ST models)
The 2.0L EcoBoost engine used in the Focus ST is a higher-performance option and typically carries a higher replacement price due to turbocharging and related hardware.
- Used long-block: $1,800–$3,500
- Remanufactured long-block: $2,800–$4,500
- New OEM EcoBoost engine: $5,000–$7,000+
- Labor for installation: $800–$1,800
- Additional parts (turbo components, intercooler hoses, etc.): $300–$800
Concluding: EcoBoost engines command a premium over the standard Duratec unit, and availability varies by region and salvage inventory. Ensure the engine code matches the ST configuration and transmission setup for proper fit.
Special case: Focus Electric motor
Replacing an electric motor or battery system in a Focus Electric is a different process from gasoline engines. This variant is less common to replace as a standalone engine, and costs can be significantly higher. If you own a 2013 Focus Electric, consult a Ford-authorized service center for current pricing and options.
Concluding: Electric models fall outside the typical gasoline engine price ranges and require specialized assessments and quotes.
Shopping tips and how to save money
Before you buy an engine, consider these steps to maximize value and reliability. The following checklist helps you compare offers and avoid surprises:
- Confirm exact engine code and compatibility with your VIN.
- Ask whether the price includes a long-block or short-block, and whether timing components, seals, and water pump are included.
- Check warranty terms (length, coverage, and whether labor is included).
- Request photos or a third-party inspection for salvage yard engines.
- Get quotes from at least three reputable sources (dealer, independent shop, salvage yard, remanufacturer).
Concluding: Due diligence helps you avoid mismatches and unexpected costs, and increases the chances of a reliable replacement.
Summary
For a 2013 Ford Focus, engine costs depend on the variant and source. The 2.0L Duratec gasoline engine is the common baseline, with lower costs for used replacements and higher totals for remanufactured or new OEM units, especially when installing in a non-ST trim. The 2.0L EcoBoost in ST models and any electric-motor configurations are generally more expensive. Installed totals commonly range from roughly $2,000 to $7,000 or more, influenced by supplier, location, warranty, and labor. Always verify engine code, VIN compatibility, and warranty details before committing to a purchase.