For a 2012 Honda Accord, a single CV axle typically costs between about $70 and $350 for the part itself, with total installed prices often ranging from roughly $200 to $500 per axle depending on labor, part choice, and your location.
What affects the price
The cost to replace a CV axle on a 2012 Honda Accord depends on several factors, including whether you need the front or rear axle, the choice of OEM versus aftermarket parts, and whether you buy a brand-new or remanufactured unit. Labor charges, regional price differences, and any ancillary work (like bearing or hub replacement) can also shift the total.
Part options
Below is a guide to the typical part-driven price ranges you can expect when shopping for a CV axle.
- OEM Honda CV axle (front or rear): generally about $180–$320 per axle if purchased new from a dealer or official parts source.
- Aftermarket CV axle (new): commonly $60–$180 per axle, depending on brand and kit contents.
- Remanufactured CV axle: often $120–$230 per axle, sometimes with a warranty.
- Used or take-off CV axle: roughly $40–$120 per axle, usually lower risk but with reduced reliability or warranty.
Prices can vary based on exact vehicle configuration, ABS ring compatibility, and whether you need an inner or outer CV joint replacement. Always verify compatibility with your car’s VIN and the supplier’s specifications.
Labor and total installed costs
Labor costs depend on local rates and the time required to complete the replacement. The following ranges reflect typical scenarios.
- DIY cost: If you provide the axle yourself, you pay only the part price (roughly $60–$320 for the axle, depending on type).
- Professional installation: Most shops quote 1–2 hours of labor per axle, with hourly rates commonly $75–$125. That yields about $75–$250 in labor per axle, though some shops use a flat-rate charge of $150–$300 per axle.
- Total installed cost (parts + labor): Often $150–$520 per axle, depending on part choice, labor rate, and regional differences.
Note that if both axles need replacement, or if related parts like bearings, hubs, or wheel alignment are required, total costs will be higher.
Where to buy and how to shop
Shop around to balance price, fit, and warranty. Consider these options when sourcing an axle for your 2012 Honda Accord.
- Dealership or official Honda parts: typically the most expensive but ensures exact OEM fit and compatibility.
- Auto parts stores (e.g., AutoZone, Advance Auto Parts, O'Reilly): commonly carry aftermarket and remanufactured options with warranties.
- Online retailers and marketplaces (e.g., RockAuto, Amazon): can offer lower prices; verify part numbers, compatibility, and warranty before purchase.
When shopping, confirm the axle part number matches your vehicle’s specifications, check whether the price includes hardware or ABS tone rings if needed, and review warranty terms. If you’re unsure, consult a mechanic or parts specialist to avoid ordering the wrong axle.
Summary
The cost to replace a CV axle on a 2012 Honda Accord varies widely based on front vs rear position, OEM versus aftermarket parts, and whether the work is done by a shop or DIY. Expect the part price to range roughly from $60 to $350, with total installed costs typically between about $200 and $500 per axle. Always confirm compatibility with your vehicle and obtain quotes from a few sources to secure the best combination of price, fit, and warranty.