A wheel bearing replacement for a Honda CR-V typically costs about $60–$420 for the part itself, with labor bringing the total per axle to roughly $210–$750. The exact price depends on the model year, whether you need a front or rear hub, and whether you choose an aftermarket part or Honda OEM.
Understanding what you’re buying and why prices vary
Wheel bearing work can involve a bearing-only replacement or a complete hub assembly. In many modern CR-Vs, especially for the front wheels, technicians often replace the hub assembly, which includes the bearing, rather than installing a separate bearing. Rear bearings may be purchased as a hub assembly or as a bearing kit. OEM parts from Honda are typically more expensive than aftermarket equivalents, and prices differ by year, trim, and whether the service is for the front or rear axle.
Front vs rear considerations
Front hub assemblies are generally more costly due to their complexity and the frequency of replacement, plus the potential need for re-alignment after installation. Rear hub replacements can be less expensive but still require precise torque and sometimes additional seals or studs.
Current price ranges for CR-V wheel bearings
Below are typical price ranges for common CR-V configurations. The ranges reflect part prices from major retailers and auto repair shops as of 2024–2026. They do not include tax or shop fees, and actual prices may vary by location and supplier.
- Front hub assembly (aftermarket): roughly $60–$220 per wheel
- Front hub assembly (OEM/Honda): roughly $150–$350 per wheel
- Rear hub assembly (aftermarket): roughly $50–$180 per wheel
- Rear hub assembly (OEM/Honda): roughly $180–$420 per wheel
Prices for parts alone can vary widely depending on the exact CR-V generation, the availability of the part, and the retailer. Always verify compatibility with your vehicle’s year and trim before ordering.
Labor costs to install a wheel bearing or hub assembly
Labor cost is driven by shop rates in your region and whether the hub needs pressing or if the bearing kit is straightforward. The numbers below are typical ranges per axle and can vary with vehicle access, required fasteners, and any related services.
- Front hub replacement labor: about $150–$300
- Rear hub replacement labor: about $120–$250
- Additional costs: axle nut, seals, hardware, potential rotor work, or wheel alignment: $20–$100
Some shops charge a flat rate that includes both parts and labor, and others bill hourly. Expect to pay more in high-cost urban markets and less in rural areas. If the work includes a wheel alignment after hub replacement, that can add around $60–$100.
Summary
In short, the price of replacing a wheel bearing on a Honda CR-V depends on whether you’re buying a hub assembly or a bearing kit, front versus rear, OEM versus aftermarket, and the local labor rate. For budgeting, plan a rough range of $210–$750 per axle, with higher end for OEM front hubs and in areas with higher labor costs. Always obtain multiple quotes and confirm exactly what’s included in the price.