Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

How much is a water pump for a 2015 Toyota Tundra?

On a 2015 Toyota Tundra, a water pump replacement typically costs about $250 to $900 installed, depending on engine (4.0L V6 or 5.7L V8), choice of parts ( aftermarket vs OEM), and local labor rates. The pump itself usually runs about $60 to $230.


This article breaks down why those prices vary, what affects the total, and how to shop smart for the best deal. We cover the two common engine options, typical part costs, labor time, and practical tips for getting a fair price.


Part costs by engine and kit contents


Prices differ based on engine and whether you buy OEM Toyota parts or reputable aftermarket equivalents. Some pumps are sold as part of a kit that may include a thermostat, gaskets, and coolant.



  • 4.0L V6 (1GR-FE): Water pump alone typically $60–$160 aftermarket; $120–$210 OEM Toyota.

  • 5.7L V8 (2UR-FBE): Water pump alone typically $70–$180 aftermarket; $130–$230 OEM Toyota.


Overall, part prices are driven by the engine option, brand, and whether the part is OEM or aftermarket. Availability and regional pricing can shift these ranges.


What’s included in a typical water pump kit


A standard kit may include the water pump, gasket or seal, and occasionally a thermostat, coolant, and instructions. Including a thermostat or coolant flush can increase upfront costs but might save future labor if you’re already in there.


Labor costs and total installed price


Labor time and rates vary by engine configuration, access, and local shop pricing. The numbers below reflect common scenarios and typical regional rates.



  1. Typical labor time: about 2–4 hours for the 4.0L V6; about 3–5 hours for the 5.7L V8, assuming a standard belt-driven pump. If timing-chain access or additional components are involved, labor can be higher.

  2. Labor rate: common shop rates range roughly from $75 to $140 per hour depending on location and shop type.

  3. Estimated total installed price: combining parts and labor, most jobs fall in the ballpark of $250–$900, with higher figures for OEM parts or more complex procedures.


Special cases—such as replacing the thermostat, hoses, or performing a coolant flush in the same service—can push the total higher, sometimes significantly.


Where to buy and how to shop


To secure a fair price, compare multiple sources and request clear, itemized quotes. Consider both parts quality and labor reliability when evaluating options.



  • Check both OEM Toyota parts and reputable aftermarket brands for compatibility with your 2015 Tundra engine option.

  • Ask for a detailed parts-and-labor estimate that breaks out the pump, thermostat, gaskets, coolant, and labor hours.

  • Consider replacing the thermostat or flushing coolant if you’re already in the radiator system, as this can reduce future service needs.

  • Review warranty terms on parts and ask about labor guarantees from the shop.


Shopping around and verifying the exact engine version and system configuration will help you lock in a fair price and avoid surprises at the shop.


Summary


For a 2015 Toyota Tundra, anticipate a total installed cost in roughly $250 to $900, with the water pump part itself usually priced between $60 and $230. The exact figure depends on engine (4.0L V6 vs 5.7L V8), OEM versus aftermarket parts, whether a thermostat or coolant service is included, and local labor rates. A careful comparison of quotes and clarity on what’s included will yield the best value.

How long does a water pump last on a Toyota Tundra?


A failing water pump can also leak causing further loss of coolant. Water pumps are designed to last at least 100,000 miles, however, if your water pump fails, you should replace it with a high-quality original-equipment level unit.



What are common 2015 Tundra problems?


Premature pad/rotor wear, pulsation or vibration, antilock system, parking brake, master cylinder, calipers, squeaking, brake failure, regenerative braking.



How much does it cost to replace a water pump in a 2015 Toyota Tundra?


The more your engine needs to be disassembled to access the water pump, the higher the labor costs. Taking all these points into consideration, you can expect to pay anywhere from $375 to $787 (including parts and labor). Of course, shopping around to get a few quotes is your best bet to get the best deal.



Can I still drive with a bad water pump?


Driving with a broken water pump is extremely risky. Since the pump is responsible for circulating coolant, a failed pump means the engine will overheat very quickly. Even short trips can turn into expensive repairs such as warped cylinder heads, blown gaskets, or a seized engine.


Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.