Prices for a valve cover gasket on a 2013 Ford Fusion vary by engine and supplier, but you can typically expect the gasket alone to range from about $20 to $120, with the full gasket kit and seals often running $40 to $130. When you add labor, the total price generally falls in the ballpark of $150 to $350, depending on engine and local shop rates.
The 2013 Ford Fusion offered several engine options, including the 2.5L I4, the 1.6L EcoBoost, and the 2.0L EcoBoost. Each engine uses a different gasket design and may require additional seals or components, which can influence both part price and labor time. This article breaks down typical price ranges and what to expect when budgeting for a replacement.
Parts pricing and engine variants
The following estimates cover common aftermarket and OEM pricing for valve cover gaskets and related seal kits, varying by engine type. Prices can fluctuate by retailer and location, so check current listings for an exact quote.
- 2.5L I4 engine: valve cover gasket (gasket only) typically $20–$60; gasket kit with seals and bolts commonly $40–$100.
- 1.6L EcoBoost engine: gasket price around $25–$90; gasket kit with seals typically $50–$120.
- 2.0L EcoBoost engine: gasket price around $30–$110; gasket kit with seals typically $60–$130.
Prices vary based on whether you buy aftermarket parts or OEM (dealer) parts, as well as whether the kit includes extra components like spark plug boots or valve cover bolts. Always compare a few sources to pinpoint current pricing for your specific engine variant.
Labor and total replacement costs
Beyond the part price, labor costs depend on local shop rates and how easily the job can be accessed. The following estimates reflect typical independent shops; dealership pricing tends to be higher.
- Labor time: Most 2013 Fusion valve cover gasket replacements take about 1.0–2.5 hours on a straightforward job; more time may be required if other components must be removed to access the valve cover or if there are complications.
- Labor rate: Common shop rates range from $75–$150 per hour, with some areas or dealerships charging more (often $120–$190 per hour).
- Estimated total cost (parts + labor): Parts $40–$130; labor $75–$375; overall typically around $115–$505, depending on engine and labor rates.
For the most accurate quote, contact a few local repair shops or a Ford dealership with your exact engine code and location. They can provide engine-specific estimates that reflect current parts pricing and labor rates.
Summary
In short, a valve cover gasket for a 2013 Ford Fusion generally costs between $20 and $120 for the part, with gasket kits often in the $40–$130 range. When you factor in labor, total job costs typically fall around $150–$350 at independent shops, though dealer pricing can push the total higher. Because prices vary by engine variant, retailer, and location, it’s wise to shop around and obtain multiple quotes before proceeding.