A thermostat for a 2017 Chevy Trax typically costs between about $8 and $60 for the part itself, depending on whether you choose aftermarket or OEM, and whether a gasket or kit is included. Installation adds labor, which varies by region and shop. In many cases, the total out‑the‑door cost ranges from roughly $100 to $250, with DIY replacement being cheaper if you have the tools and follow proper cooling-system procedures.
In more detail, prices depend on the exact part configuration (standalone thermostat vs. kit vs. housing), the brand, and where you shop. Labor costs depend on your location, the shop’s rate, and whether you do the job yourself. Below is a practical guide to typical price ranges, installation considerations, and where to buy.
Price ranges for the thermostat itself
Prices can vary by brand, packaging, and whether you buy standalone parts or kits. The following ranges reflect common options for a 2017 Trax:
- Aftermarket thermostat (non-OEM brands): typically $8–$25
- OEM GM thermostat (Delphi/ACDelco or dealer equivalents): typically $25–$60
- Thermostat kit (thermostat plus gasket or seal): roughly $12–$40
- Thermostat with housing or integrated unit (if available as a combined part): roughly $25–$80
Prices can fluctuate with promotions, availability, and region, so it’s wise to shop around and confirm fit for your vehicle’s engine variant before purchasing.
Installation costs and considerations
Before listing typical labor scenarios, note that installation costs depend on whether you DIY or have a shop do it. The following estimates assume a standard passenger SUV engine bay and typical regional rates.
- Labor time: generally 1 to 2 hours for a thermostat replacement on a compact SUV like the Trax
- Labor rate: commonly $80–$120 per hour, though some shops may charge more in busy areas
- Estimated total labor cost: roughly $80–$240
- DIY considerations: saving on labor, but you’ll need tools, a coolant drain pan, a method to bleed air from the cooling system, and a new gasket or sealant as required
Prices and availability can vary, so it’s a good idea to get quotes from a few shops and verify whether they charge a flat rate for thermostat replacement or an hourly rate, plus any coolant disposal fees.
Where to shop for a 2017 Chevy Trax thermostat
Choosing between OEM, aftermarket, or used parts depends on your budget and preference for durability. The following sources are common options:
- Auto parts stores (AutoZone, Advance Auto, O'Reilly): typically carry aftermarket thermostats and sometimes OEM equivalents, with prices generally in the $8–$30 range
- Online retailers (RockAuto, Amazon, vendor sites): wide range of brands and kits; expect $8–$40 depending on contents and brand
- GM dealer or official parts department: OEM parts are usually in the $25–$60 range, with tax and availability depending on location
- Salvage yards or used-parts sellers: potential bargain options, often around $5–$15 for a used unit
When buying, verify part numbers and compatibility with your Trax’s engine and VIN, and check whether the kit includes a gasket or any required seals. It’s also wise to confirm return policies in case the part isn’t correct for your vehicle.
Summary
For a 2017 Chevy Trax, plan for a parts price range of roughly $8–$60 for the thermostat itself, with total project costs often landing between about $100 and $250 depending on location and whether you DIY or hire a shop. OEM parts tend to be more expensive than aftermarket options, while kits that include a gasket or other components add to the upfront cost. Always verify compatibility with your engine variant and consider local labor rates when budgeting. A careful DIY replacement can save money, but proper coolant bleeding and leak testing are essential to avoid overheating or air pockets.