A starter for a 2010 Chrysler Town & Country generally costs from about $60 to $320, depending on whether it's remanufactured or new and whether it's aftermarket or OEM Mopar; installation adds roughly $100 to $350.
The 2010 Town & Country typically uses a 3.8-liter V6 engine, and the starter is a standard 12-volt motor. Prices vary by retailer, warranty, and whether you buy new, remanufactured, or used. The following guide breaks down typical price ranges, installation considerations, and shopping tips.
What affects the price
Several factors determine how much you’ll pay for a starter, including condition, brand, and where you buy.
New versus remanufactured versus used
Prices follow the general pattern below, but actual quotes vary by retailer and warranty terms.
- Used / salvage: typically $40–$100 (often with limited or no warranty).
- Remanufactured aftermarket: typically $60–$180 (common balance of price and warranty).
- New aftermarket (non-OEM): typically $100–$250 (warranty varies by brand).
- OEM Mopar (new or remanufactured): typically $180–$320 (usually the highest warranty and fit assurance).
In short, the biggest price differences come from choosing used, remanufactured, or new parts and whether you buy from an aftermarket seller or a dealer.
Labor and total cost to replace
If you’re planning professional installation, budget for labor in addition to the part price. Here’s what to expect.
Typical labor considerations
Estimated ranges reflect common shop practices and regional differences.
- Time to replace: about 0.5–1.5 hours for a straightforward replacement at home; 1–2 hours or more in a shop depending on access and vehicle setup.
- Labor rate: roughly $75–$125 per hour, depending on region and shop level.
- Estimated labor cost: about $75–$250 or more, plus any shop fees or environmental charges.
- Additional costs: tax, core charge (if applicable), disposal fees, and potential diagnostic fees if other issues are found.
Note that a professional replacement may be more expensive in busy markets or for vehicles with difficult access to the starter. Always request an itemized quote that separates parts, labor, and taxes.
Where to shop for a starter
Several national chains and online retailers stock starters that fit the 2010 Town & Country. Prices fluctuate with promotions and inventory, so it’s wise to compare multiple sources.
Common sources to check
- AutoZone
- O'Reilly Auto Parts
- Advance Auto Parts
- RockAuto (online warehouse pricing)
- Chrysler/Mopar parts department or dealer
- Salvage yards or online used-parts marketplaces
When shopping, bring your Vehicle Identification Number (VIN) and know your engine size to confirm fit. Look for parts that include a warranty and check whether a core charge applies.
How to ensure you get the right part
Compatibility is crucial for a seamless replacement. Verify the year, make, model, engine size, and transmission setup. If you’re unsure, ask the parts dealer to confirm the exact part number using your VIN, and consider a remanufactured unit with a solid warranty to balance cost and reliability.
Summary
For a 2010 Chrysler Town & Country, starter prices span a broad range—from salvage-yard steals around $40–$100 to new OEM or remanufactured units in the hundreds, with labor adding a comparable amount. Shopping smartly by comparing new, remanufactured, and used options across retailers, and factoring in installation costs and warranties, helps you find a price that fits your budget. Always confirm compatibility with the exact vehicle and engine size before purchasing, and consider professional installation if you’re not comfortable with the job.