A starter motor for a 2006 Dodge Charger typically costs between roughly $70 and $380, depending on engine type and whether you choose aftermarket or OEM; labor and core charges can add to the total.
Price ranges by engine configuration
Prices vary by which engine your Charger uses. The starter for the V6 configuration is generally cheaper than the one for a high-performance V8 Hemi; always verify compatibility with your VIN before purchasing.
V6 configuration
For the V6 models, you’ll find a broad range of options from aftermarket to OEM remanufactured. Here are typical ranges.
- New OEM Mopar starter: roughly $180-$260
- Remanufactured OEM: roughly $150-$230
- Aftermarket new (Bosch/Denso/Valeo): roughly $110-$240
- Aftermarket remanufactured: roughly $70-$140
- Used/salvage: roughly $50-$120
Prices can vary by retailer, core charges, and availability; always confirm part compatibility with your exact model and VIN.
Hemi V8 configuration
For the 5.7L Hemi-equipped Chargers, parts tend to be higher in price due to size and demand. Typical ranges:
- New OEM Mopar starter: roughly $200-$380
- Remanufactured OEM: roughly $170-$260
- Aftermarket new: roughly $120-$260
- Aftermarket remanufactured: roughly $60-$140
- Used/salvage: roughly $50-$150
Core charges may apply and exact part numbers must match your engine configuration; verify compatibility before purchase.
Labor and total installed cost
Beyond the part price, installation costs depend on location and whether you hire a shop or do it yourself. Here are typical expectations for professional installation.
- Estimated labor time: 1-2 hours
- Average shop labor rate: $75-$150 per hour (varies by region)
- Estimated total installed cost: roughly $150-$350 for V6 models; $180-$480 for V8 (parts + labor)
- Additional costs: core charges, disposal fees, or replacement of related components if needed
Always get a written quote that itemizes parts, labor, core charges, and any warranty coverage.
Summary
For a 2006 Dodge Charger, plan for a broad price range on a starter depending on engine type and supplier. Parts alone generally run from about $70 up to $380, with labor potentially bringing the total to roughly $150-$480. To avoid surprises, confirm the exact part number for your engine, check whether a core charge applies, and obtain a clear, itemized estimate from the seller or shop.