In broad terms, you’ll typically pay part prices that range from about $60 to $350 for the starter itself, and when you include installation, total costs commonly fall between roughly $180 and $600 depending on engine type, brand, and local labor rates.
The exact price depends on which engine your Silverado has (most 2000 models offer a 4.3L V6 or a small-block V8 such as a 5.0L or 5.7L) and whether you choose a remanufactured unit, a new aftermarket part, or a dealer-sourced OEM option. This article breaks down the typical price bands, what drives them, and practical buying tips.
Starter options and price ranges
Prices below reflect common replacement options for a 2000 Silverado, including remanufactured units, new aftermarket starters, and higher‑duty variants. Availability varies by engine type and supplier.
- Remanufactured starter (standard duty, compatible with 4.3L/5.0L/5.7L engines): typically $60–$150
- New aftermarket starter (brand-name, standard duty): typically $100–$230
- OEM remanufactured starter from a dealer/authorized source: typically $150–$320
- Heavy‑duty or high‑torque starter (for cold starts or tougher cranks): typically $180–$350
- Used or salvage-yard starter (quality varies; ensure compatibility): typically $20–$70
Conclusion: For most owners, a remanufactured or standard new aftermarket starter provides a solid balance of price and reliability. Always confirm compatibility with your exact engine and verify warranty terms before purchasing.
Labor costs and total installed price
Replacing a starter on a 2000 Silverado is a manageable job for a competent DIYer or a professional technician. Time and price vary with engine layout, access, and local labor rates. It’s usually a straightforward swap involving battery disconnection, mounting bolts, and wiring checks.
- Typical labor time: 1–2 hours
- Labor rate: roughly $75–$125 per hour in many shops (higher in urban areas)
- Installed cost for a remanufactured starter: roughly $135–$400
- Installed cost for a new aftermarket starter: roughly $200–$470
- Installed cost for dealer OEM remanufactured/high‑torque variants: roughly $300–$570
Conclusion: If you’re on a tight budget, a DIY replacement with a remanufactured unit can dramatically cut costs, provided you have the right tools and follow safety precautions. Always test the system after installation and keep a warranty in mind when choosing a part.
Buying tips and where to shop
Smart shopping can save money and reduce headaches. Consider the following before purchasing a starter:
- Auto parts stores (AutoZone, O'Reilly, Advance) often offer warranties and in-store pickup, which can simplify returns and core exchanges.
- Online retailers (RockAuto, Amazon, manufacturer sites) frequently offer lower base prices but check shipping costs, core charges, and warranty terms.
- Salvage yards can be the cheapest option, but availability and condition vary; verify fitment and test the unit if possible.
- Check compatibility by confirming engine code, exact part number, and VIN. Some starters look similar but have different gear ratios or mounting patterns.
Concluding guidance: Compare warranties, core charges, and return policies. Verify the part number with your vehicle’s VIN and keep the receipt and warranty information in case you need support later.
Engine compatibility notes
The 2000 Chevrolet Silverado offered several engine options, including the 4.3L V6 and the 5.0L/5.7L V8 families. Starter motors are not universally interchangeable between these engines, so confirming the correct part number for your exact engine is essential to ensure proper fit and performance.
What to verify before buying
Use your vehicle’s VIN or the current starter’s part number to cross-reference compatibility. If in doubt, ask the parts retailer for a fitment check against your truck’s exact configuration.
Summary
The cost to replace a starter on a 2000 Chevy Silverado depends largely on engine type, part choice, and your labor approach. Expect part prices roughly in the $60–$350 range, with installed totals typically between $180 and $600. Remanufactured and standard aftermarket starters strike a practical balance, while dealer OEM or high‑torque variants push the price higher. Whether you DIY or hire a shop, verify engine compatibility and warranty terms to ensure a reliable, long‑lasting fix.
How much is a 2000 Chevy Silverado 1500 worth today?
2000 Chevrolet Silverado 1500 Value - $449-$2,658 | Edmunds.
How much does it cost to replace a starter on a Chevy Silverado 1500?
between $513 and $773
The average cost for a Chevrolet Silverado 1500 Starter Replacement is between $513 and $773. Labor costs are estimated between $200 and $293 while parts are priced between $313 and $479. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
What are the common problems with a 2000 Chevrolet Silverado 1500?
AC compressor, blower (fan) motor, condenser, evaporator, heater system, automatic climate system, electrical failure, refrigerant leakage.
What year to stay away from a Chevy 1500?
The 2008 model year competes with the 2014 model year as one of the worst ever produced. Due to its frequent engine problems and overuse of oil, which was repair that cost owners over $2,700 to fix, this problem continued onward from the 2007 into the 2009 model years.