A single rotor for a 2010 Ford Fusion typically costs about 30–120 USD from aftermarket parts, while OEM Ford rotors usually run 60–150 USD each. For a full axle, expect two rotors and additional labor costs. Prices vary by front vs rear, rotor design, and supplier.
Rough pricing reflects whether you replace the front or rear rotors, the rotor design (plain, cross-drilled, or slotted), and whether you opt for OEM Ford parts or aftermarket equivalents. Labor costs and regional pricing also influence the total job cost. The Fusion's braking setup can change by trim and drivetrain, so it's wise to confirm exact rotor size and style for your vehicle using the VIN before buying.
What affects rotor pricing
Front vs rear and rotor style
The front brakes typically handle more braking load and are usually vented discs, while the rear brakes can be solid discs or vented depending on the configuration. This difference influences availability and price.
OEM vs aftermarket and rotor design
OEM Ford rotors from a dealership tend to be more expensive but offer a guaranteed fit and warranty. Aftermarket rotors vary by brand and design; plain rotors are cheaper, while cross-drilled or slotted designs cost more and may promise better heat dissipation or braking characteristics.
Estimated price ranges by category
- Front aftermarket standard rotor: about 30–70 USD per rotor
- Rear aftermarket standard rotor: about 25–60 USD per rotor
- Front OEM Ford rotor: about 60–120 USD per rotor
- Rear OEM Ford rotor: about 50–100 USD per rotor
- High-performance or cross-drilled/slotted rotors (aftermarket): about 80–180 USD per rotor
These ranges reflect typical prices in the United States as of 2024–2026 and can vary by retailer, promotions, and regional taxes.
Installation costs and options
Labor costs and configurations can sway the total price significantly. The following ranges cover common scenarios for rotor replacement on one axle (not including pads or hardware).
- Labor to replace rotors (per axle): about 90–180 USD
- DIY cost savings vs. shop labor: depends on tools and skill; potential savings but higher risk of incorrect installation
- Replacing pads at the same time: add roughly 30–100 USD per axle for pads, plus additional labor if done separately
Note that some shops include rotor disposal fees, alignment checks, or brake fluid topping in their quotes. Always confirm what’s included in the price when you get an estimate.
How to buy accurately
To ensure you order the correct rotors for your 2010 Ford Fusion, gather the key details before shopping.
- Vehicle year, trim level, and drivetrain (to confirm rotor type and size)
- VIN or precise rotor specs (diameter, thickness, and hub bore)
- Front vs rear rotor requirement and whether you want plain or performance designs
- Brand preference, warranty, and whether OEM or aftermarket parts are desired
Double-check the part number against the retailer’s catalog and cross-check with your vehicle’s specifications to avoid ordering the wrong rotor. If in doubt, contact the seller with your VIN for a VIN-based match.
Summary
rotor prices for a 2010 Ford Fusion vary by location, rotor position (front vs rear), rotor design (plain, cross-drilled, or slotted), and whether you choose OEM Ford parts or aftermarket equivalents. Typical ranges are roughly 30–70 USD per front rotor and 25–60 USD per rear rotor for aftermarket, or 60–120 USD per front rotor and 50–100 USD per rear rotor for OEM. Labor usually adds around 90–180 USD per axle, with additional costs if you replace pads or opt for higher-end rotor designs. Always verify exact sizes and part numbers using your VIN before purchasing.
How much do rotors cost for a 2010 Ford Fusion?
The average price for a 2010 Ford Fusion Brake Rotors and Drum at Advance Auto Parts is around $88.87, with a range that starts at $40.99 and goes up to $149.99.
Ask More
How much do rotors cost for a Ford Fusion?
The average price for a 2020 Ford Fusion Brake Rotors and Drum at Advance Auto Parts is around $102.82, with a range that starts at $60.99 and goes up to $175.99.
Ask More
What's the best oil for a Ford Fusion?
Recommended Oil Specifications for Ford Fusion Engines
| Engine | Recommended Oil |
|---|---|
| 2.0L EcoBoost I4 (2013-2020) | SAE 5W-30 Full Synthetic |
| 2.5L Duratec I4 (2010-2020) | SAE 5W-20 Full Synthetic |
| 2.7L EcoBoost V6 (Fusion Sport, 2017-2019) | SAE 5W-30 Full Synthetic |
| 2.0L Hybrid / Plug-in Hybrid | SAE 0W-20 Full Synthetic |
Ask More
How much does one rotor cost?
Each aftermarket rotor costs an average of $30 to $75. Labor to service brakes can run from $90 to $200 per hour. Brake service generally runs approximately $200 to $500 per axle at a professional center.
Ask More