For a 2000 Dodge Durango, a new aftermarket power steering pump typically costs about $60 to $150, with remanufactured units generally $40 to $100. OEM/dealer pumps can run higher, roughly $180 to $320. Labor to install the pump is usually additional, in the $150 to $350 range depending on shop rates and location.
The Durango’s 2000 model year uses a hydraulic power steering system driven by a belt, and the price you pay for a replacement part depends on whether you buy new aftermarket, remanufactured, or OEM equipment. Price can also differ based on engine configuration (2WD vs. 4WD, and whether it’s the 5.2L or 5.9L engine), included hardware (pulley, reservoir, hoses), and whether a core charge applies. Labor costs vary by region and the shop’s hourly rate, and some shops factor in additional components if hoses or other seals need replacement during the job.
Price ranges by type
Prices differ depending on whether you buy a new aftermarket unit, a remanufactured unit, or an original equipment (OEM) unit from a dealer. The ranges below reflect typical market prices and can vary by retailer and region.
- New aftermarket power steering pump: approximately $60–$150
- Remanufactured power steering pump: approximately $40–$100
- OEM/dealer power steering pump: approximately $180–$320
- Core charge (varies by supplier): typically $0–$75, refundable after core return
When shopping, consider compatibility with your Durango’s engine and drivetrain, whether the price includes necessary hardware (pulley, reservoir, hoses), and the retailer’s warranty and return policy.
What affects the price
Several factors can influence the final price you pay for a power steering pump.
- Brand and quality: well-known brands or OEM-equivalent units usually cost more but may offer longer warranties.
- Remanufacturing standards: some reman pumps include upgraded seals or improved components.
- Vehicle specifics: different Durango configurations (2WD vs. 4WD; 5.2L vs. 5.9L) may require specific pump variants.
- Included components: whether the kit includes hoses, pulley, reservoir, or pressure lines.
- Core charge and return policy: some vendors require a core deposit that is refunded upon return of the old unit.
- Labor rate and location: installation costs vary by region and shop.
Use these factors to balance upfront cost with reliability and warranty. If unsure, confirm the exact pump variant and parts included for your Durango's engine and drivetrain configuration before purchasing.
Where to buy
Reliable sources for a 2000 Dodge Durango power steering pump include both brick-and-mortar stores and online retailers. The following options are commonly used by owners.
- AutoZone, O'Reilly Auto Parts, NAPA Auto Parts: carry new and remanufactured pumps with warranties.
- RockAuto: online retailer with a wide range of brands and price points.
- Amazon and eBay: third-party sellers offering new and remanufactured options; check seller ratings and warranty terms.
- Dealer or Chrysler-certified suppliers: may offer OEM parts, typically at higher prices.
- Salvage yards or used-parts marketplaces: can be cheaper but carries more risk regarding condition and warranty.
Compare delivery times, returns, and warranties. Ensure the part matches your Durango’s exact engine and drivetrain configuration and that any included hardware aligns with your vehicle’s needs.
DIY vs professional replacement
Installing a power steering pump involves working with the belt-driven system, draining fluid, and dealing with high-pressure lines. If you’re not comfortable with automotive hydraulic systems, a professional installation is advised to avoid leaks or air in the steering system.
For a mechanically inclined DIYer, the job is doable with basic hand tools, but you should have the correct power steering fluid and know how to properly bleed the system after installation.
Installation steps (high level)
The following sequence outlines a typical replacement process, but always refer to your vehicle’s service manual for specifics.
- Relieve system pressure and disconnect the battery; clamp or cover lines as needed.
- Relieve tension from the serpentine belt and remove the belt.
- Disconnect high-pressure and return lines from the old pump; catch any residual fluid.
- Remove mounting bolts and install the new pump in the reverse order of removal.
- Reconnect lines, belt, and any electrical connections if applicable; refill with the correct type of power steering fluid.
- Bleed the system to remove air; check for leaks and test steering assist at low and then moderate speeds.
Bleeding and leak checks are essential to ensure proper operation after installation.
Cost breakdown and practical tips
To plan your budget, combine part price ranges with typical labor costs and potential add-ons.
- Part cost: expect a total between roughly $40 and $320 depending on part type and supplier.
- Labor: commonly $150–$350, depending on shop rates and local labor costs.
- Additional parts and services: hoses, fluid, belts, or reservoir replacement may add $20–$100 or more.
- Warranty: check if the pump and any remanufactured units come with a limited warranty; some retailers offer longer coverage for higher-priced items.
Shopping around, confirming the exact fit for your engine and drivetrain, and understanding any core charges will help you get the best value for a Durango power steering pump replacement.
Summary
A 2000 Dodge Durango power steering pump typically costs between $60 and $150 for a new aftermarket unit, $40 to $100 for a remanufactured unit, and $180 to $320 for an OEM/dealer part, with additional labor of about $150 to $350. Prices vary by engine configuration, included hardware, core charges, and where you buy. Whether you DIY or hire a pro, ensure the part matches your Durango’s exact specifications and that the system is properly bled after installation.