In general, a PCM replacement for a 2010 Dodge Avenger costs roughly $150 to $1,200, depending on source, condition, and engine configuration.
The exact price depends on whether you buy a brand-new OEM unit, a remanufactured unit, or a used salvage PCM, and on whether programming and installation are included. The 2010 Avenger offered different engine options, which means compatibility with your VIN matters. This article breaks down typical price ranges, what affects those costs, and tips for shopping.
Pricing options by source
Prices vary by source and part type; the following ranges are commonly seen across dealers and auto parts retailers as of 2024–2026.
- New OEM PCM: roughly $700–$1,200, depending on engine variant and supplier.
- Remanufactured PCM: typically $350–$700, often with a warranty and shorter lead time than new.
- Used or salvage PCM: about $150–$350, frequently cheaper but with higher risk and shorter remaining life.
Concluding note on this price range: always confirm compatibility with your vehicle’s VIN and engine, and be aware that some sellers apply core charges or require returning your old unit.
Additional costs to expect
In addition to the basic PCM price, you may incur several other costs that affect the total project price.
- Core charge and core return: many suppliers bill a refundable core deposit, typically $20–$100, refunded when you return the old PCM.
- Programming and immobilizer programming: most modern Chrysler vehicles require VIN-specific programming to work with the immobilizer and other modules; this can add $80–$200, or more at a dealership.
- Labor/installation: professional installation and programming can range from $100–$300 or higher, depending on local rates and whether additional modules must be synchronized.
Bottom line: even within the same price category, the total installed cost for a PCM on a 2010 Dodge Avenger can vary widely, especially once programming and labor are included.
What affects PCM price for a 2010 Avenger
Engine variant and PCM compatibility
The Avenger’s PCM must be compatible with the specific engine and transmission configuration, which varies by trim and market. A 2.4L inline-four will use a different PCM than a 3.5L V6, which drives the price and availability.
OEM vs. aftermarket
OEM units are generally more expensive but offer guaranteed compatibility and support from Chrysler/Dealers. Aftermarket or remanufactured units can be cheaper but may have variable warranties and programming limitations.
Programming requirements
Many PCM replacements require VIN programming and security/immo alignment. If the unit isn’t pre-programmed for your VIN, you’ll need to visit a dealer or a shop with the right equipment, which adds to the cost.
Shopping tips for a 2010 Dodge Avenger PCM
Know your VIN and engine
Before shopping, locate your vehicle’s VIN and confirm the exact engine specification to ensure you buy a PCM that’s compatible with your car. A wrong PCM won’t run properly or may cause error codes.
Check warranty and return policy
Prefer remanufactured or OEM units that come with a warranty. Check the return policy on cores and the terms of the warranty for the PCM itself and any programming.
Get a price from multiple sources
Prices can vary widely between the dealership, independent shops, and online retailers. Get quotes from at least three sources, including a dealer, a reputable auto parts retailer, and a salvage yard, to compare total installed costs.
Summary
Replacing the PCM on a 2010 Dodge Avenger can cost from roughly $150 for a used unit to $1,200 for a new OEM part, with programming and labor often adding a substantial amount to total cost. The biggest price drivers are engine compatibility, whether the part is new, remanufactured, or used, and whether VIN-specific programming is required.shopping wisely—checking VIN compatibility, understanding core charges, and obtaining multiple quotes—helps you minimize risk and avoid surprise costs. Always plan for programming and installation when budgeting for a PCM replacement.