The part itself typically costs about $15–$120, depending on whether you choose aftermarket or OEM, and on the engine variant. Installation usually adds $80–$300 in labor, so the total installed price commonly falls in the $100–$420 range. Prices vary by region, retailer, and vehicle configuration, so it’s best to shop around for an exact quote.
Understanding the part and its price
The oil pressure sensor (often called the oil pressure sending unit) monitors engine oil pressure and reports to the gauge or engine computer. When it fails, you may see a warning light or erratic readings. Prices differ based on source and part type (OEM Mopar vs aftermarket) and on the engine configuration (for example, 3.6L V6 vs. 5.7L Hemi).
Cost overview
Parts price ranges
Prices vary by source and quality. Typical ranges you’ll encounter are:
- Aftermarket/new sensor: about $15–$60
- OEM/Mopar sensor: typically $60–$120
- Used or remanufactured sensor: often $15–$50
Conclusion: Part price largely reflects quality, warranty, and fit; OEM parts cost more but offer guaranteed compatibility.
Labor costs
Installation effort depends on engine layout and access. General labor ranges include:
- 1–2 hours of shop time at $80–$150 per hour: roughly $80–$300
- DIY option saves labor costs if you have the needed tools and know-how
Conclusion: Labor is typically the main driver of the total price; getting a written estimate from a local shop helps set expectations.
Where to buy and installation options
Buyers should confirm compatibility with their exact engine variant and choose between OEM and aftermarket parts. Options include national auto parts chains, independent garages, and Jeep/Mopar dealerships.
- Auto parts stores (e.g., AutoZone, O'Reilly, Advance Auto Parts): mostly aftermarket sensors; may offer warranties and price matching.
- Mopar/Jeep dealerships: OEM sensors with fitting guarantee; typically higher price.
- Online retailers and marketplaces: price varies; verify part numbers and return policies.
Conclusion: To get the best value, compare prices for the exact engine variant and desired part type, and request a written installation quote before proceeding.
Summary
For a 2011 Jeep Grand Cherokee, the oil pressure sensor itself generally costs $15–$120, with installation bringing the total to about $100–$420 depending on engine type, local labor rates, and whether you select OEM or aftermarket parts. Always verify compatibility and obtain multiple quotes to ensure you’re getting a fair price. If you’re handy, a DIY install can further reduce costs, provided you have the proper tools and precautions.
How much is a 2011 Jeep Grand Cherokee worth today?
The value of a used 2011 Jeep Grand Cherokee ranges from $1,661 to $5,848, based on vehicle condition, mileage, and options. Get a free appraisal here.
How much does it cost to replace the oil pressure sensor on a Jeep Grand Cherokee?
The average cost for a Jeep Grand Cherokee Oil Pressure Sensor Replacement is between $323 and $439. Labor costs are estimated between $250 and $367 while parts are typically priced around $73. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
How much should it cost to replace an oil sensor?
DIY vs. pro: what to expect
| Approach | Cost | Risk |
|---|---|---|
| DIY (recommended only if sensor is easy to access) | $15–$80 | Low–Medium (oil seep/mess, stripped threads, wrong part, overtightening, damaging connector) |
| Professional | $175–$219 | Low (professional experience, warranty) |
What are the symptoms of a failing oil pressure sensor?
Fluctuating. Between the two a quick tip to help you determine if your oil pressure sensor is bad is by checking your engine. Oil. If it's full then it's probably time for a new sensor.