In short, a 2015 Toyota Camry’s fuel pump assembly typically costs between roughly $170 and $550 for the part itself, with installation bringing the total to about $500 to $1,000 depending on engine type, labor rates, and supplier. Prices vary by OEM versus aftermarket parts, your location, and whether any related components need replacement during service.
For context, the Camry offers two common engine options for that year—the 2.5-liter four-cylinder and the 3.5-liter V6. The fuel pump is housed in the fuel tank as part of the fuel-pump module, so replacement usually involves accessing the tank, draining fuel, and sometimes dropping the tank. This affects labor time and price. The following breakdown gives a current snapshot of typical prices from major retailers and service providers.
Current price ranges for the fuel pump assembly
Prices below reflect typical consumer ranges for the pump module itself (parts) and common installation costs from leading retailers and repair shops as of 2024–2026.
- Parts, aftermarket fuel-pump assembly (non-OEM): $120–$250
- Parts, OEM Toyota fuel-pump assembly: $250–$520
- Labor to replace the fuel pump: $180–$500, depending on vehicle condition and local labor rates
- Total installed price (parts + labor): $500–$1,000
Prices vary widely by region, model specifics (2.5L vs 3.5L), and whether additional components (fuel filter, sending unit, or related hoses) are replaced during service. Always verify current quotes with your mechanic or parts seller to get an accurate estimate for your vehicle and location.
Factors that affect price
Before considering a purchase, it helps to understand what drives price differences across parts and labor.
- Part type and branding: aftermarket vs OEM Toyota parts often differ in price and warranty.
- Vehicle engine configuration: the 2.5L four-cylinder and the 3.5L V6 may have different part numbers and installation complexities.
- Labor rates and shop location: urban areas and dealer shops tend to cost more for labor.
- Tank access requirements: some Camrys require more tank work, increasing labor time.
These factors explain why a quote can vary significantly between a dealership, an independent shop, and an online parts retailer.
Where to buy and what to expect
Finding the right source for the fuel-pump assembly involves weighing price, warranty, and turnaround time.
- Toyota dealership or authorized service center: typically the most expensive option but ensures OEM parts and dealership-trained installation.
- Major auto parts stores (AutoZone, O'Reilly, Advance Auto Parts): broad range of aftermarket and some OEM options, often with in-store pickup and warranties.
- Online retailers (RockAuto, PartsGeek, Amazon): often competitive prices and quick shipping, but check warranty terms and whether the unit is new, remanufactured, or rebuilt.
- Remanufactured or rebuilt units: can save money but assess warranty length and reliability for your climate and driving conditions.
When shopping, compare the full kit contents (pump module only vs. module plus sending unit, fuel filter, clamps), warranty duration, and return policies. A reliable pump with a solid warranty can save money in the long run by reducing the risk of repeat service calls.
Installation considerations
Installation typically requires careful handling of the fuel system, safe fuel-system depressurization, and, in many cases, tank access. DIY replacement is possible for mechanically inclined owners with proper safety precautions, but many buyers opt for professional installation to ensure correct fuel-line connections and to minimize fire risk. If you’re considering a DIY approach, ensure you have the right tools, a safe workspace, and a plan for disposing of or recycling any fuel-contaminated materials.
Professional installation will include diagnostic checks to confirm the new pump operates properly and that the fuel pressure and volume meet system specifications. Expect an inspection for leaks and a test drive to confirm the repair is complete and reliable.
Summary
For a 2015 Toyota Camry, plan for a cost range that spans roughly $170–$550 for the fuel-pump assembly itself, with total installed costs typically between $500 and $1,000 depending on engine configuration, labor rates, and whether you choose aftermarket or OEM parts. Prices vary by region and shop, and the installation complexity can influence the final total significantly. To get an accurate quote, contact several local suppliers—dealerships, national parts chains, and independent shops—and ask for itemized estimates that include parts, labor, and any related services or warranties.