For a 2013 Honda Accord, you can expect the total replacement cost to run roughly $500 to $900, depending on the engine option, parts choice, and labor rates. In some cases, prices can be lower or higher based on local shop pricing and whether you source parts yourself.
The price you pay reflects several factors: the exact engine variant (2.4L inline-four vs. 3.5L V6), whether you use an OEM Honda fuel pump assembly or an aftermarket unit, and the labor required to drop the fuel tank and install the new pump. Below is a practical breakdown to help you plan.
Parts options and price ranges
Before listing common part options, note that prices vary by supplier, region, and whether the part is OEM or aftermarket. The ranges below reflect typical market prices in the United States as of 2024–2026.
- OEM Honda fuel pump assembly (complete module with sending unit): typically between $350 and $700, with dealer prices often higher.
- Aftermarket fuel pump assembly (brand such as Bosch, Delphi, Dorman, etc.): commonly $120 to $300, depending on brand and exact compatibility.
- Fuel pump kit or replacement pump (pump only or sending unit replacements, often used in aftermarket kits): roughly $60 to $180, not including labor.
In practice, the exact price depends on which engine your Accord has (2.4L or 3.5L) and where you source the part. OEM parts generally carry a warranty and a guaranteed fit, while aftermarket parts can offer cost savings but vary in warranty terms.
Labor costs and total estimate
Labor costs cover removing the rear seat/floor panels, dropping the fuel tank, replacing the pump, and reassembling. Labor time and rates are the main drivers of total cost.
- Labor time: typically 2.5 to 5 hours, depending on access and technician experience.
- Shop labor rate: commonly $75 to $150 per hour in many regions; premium or urban shops may charge more.
- Total estimate: roughly $500 to $900 for combined parts and labor; DIY parts-only purchases could bring the cost down to the price of the part alone (plus any tools you may need).
These figures are common in North American markets. If you live in an area with high labor rates or you require the more expensive V6 variant, expect toward the upper end of the range. Conversely, using an aftermarket part at a smaller independent shop can push the total toward the lower end.
Where to buy and how to save
Shopping strategies can trim costs without sacrificing reliability. Consider the following options and tips.
- Compare quotes from multiple shops or parts retailers to find the best overall price, including any core charges or disposal fees.
- Ask for a written estimate that itemizes parts and labor, plus any warranty terms on the pump.
- Consider OEM vs aftermarket with attention to warranty and return policy; durable aftermarket options can save money if they carry solid warranties.
- Check if the pump includes the sending unit and filter assembly, and confirm compatibility with your exact engine code (e.g., 2.4L vs 3.5L), to avoid fitment issues.
Planning ahead with these steps can help you minimize surprises when you receive the final invoice.
Symptoms and diagnosis (when a replacement is needed)
Recognizing fuel-pump issues before they fail completely can inform your shopping approach and timing.
- Engine sputtering or stalling under load, especially at higher speeds or when the tank is lower.
- Intermittent no-start or hard-start conditions that improve after fuel is primed or car sits for a while.
- Loss of power or hesitation, particularly when acceleration is required.
- Diagnostic trouble codes related to fuel pressure or fuel pump circuit, or a confirmed low fuel pressure reading.
If you notice these symptoms, have a qualified technician perform a pressure test to confirm the cause before purchasing parts.
Summary
Replacing the fuel pump on a 2013 Honda Accord typically falls in a broad price window of $500 to $900 total, influenced by engine variant, part choice (OEM vs aftermarket), and local labor rates. Parts alone can range from roughly $60 to $700, while labor commonly adds several hundred dollars. Always obtain multiple quotes, verify exact part compatibility, and ensure warranty terms are clear before proceeding. If you’re mechanically inclined, DIY can reduce costs by cutting labor, though tank work requires careful handling and safety precautions.
Bottom line
Whether you opt for OEM parts, aftermarket components, or professional service, planning ahead with a detailed quote and a clear understanding of your Accord’s specific engine variant will help you get the right pump at the right price.