The price for a 2013 GMC Sierra fuel pump varies widely, but you can expect the part itself to run roughly from about $60 up to $450 depending on whether you choose a remanufactured, aftermarket, or OEM in-tank module. Factoring in installation, most customers see a total bill in the ballpark of $360 to $1,000, depending on labor rates and whether the shop must drop the fuel tank.
Details: The Sierra uses an in-tank fuel pump module housed inside the fuel tank, and engine options for that model year include 4.3L V6, 4.8L V8, 5.3L V8, and 6.2L V8. Prices can vary by engine configuration, part number, bundle inclusions (such as sending unit, seals, and locking ring), and retailer. Always verify the exact part number and what’s included in the kit when comparing quotes.
What affects the price
Prices depend on the source, the pump type, and whether you’re buying new, remanufactured, or aftermarket. Here are typical ranges you’ll see:
- OEM new in-tank fuel pump module: typically about $250–$450 before tax
- Aftermarket new in-tank pump module: typically about $100–$250
- Remanufactured in-tank pump module: typically about $60–$150
Prices can vary based on engine variant, part number, regional pricing, taxes, shipping, and whether the kit includes additional components like seals or the sending unit. Always confirm the exact part number and inclusions before purchasing.
Labor costs and total price considerations
Before considering labor, note that installation difficulty depends on whether the fuel tank needs to be dropped, and on the shop’s hourly rate. Here are typical labor-range expectations:
- Independent repair shop installation: approximately $300–$800 total, depending on local rates and job complexity
- Dealership installation: typically $450–$1,000 or more, reflecting higher labor costs
- DIY replacement: parts-only cost (no labor), suitable for skilled DIYers with proper safety precautions
Labor costs can push the total price substantially higher at a shop, especially if the fuel tank must be drained, removed, or if ancillary work (like replacing seals or the fuel filter) is recommended. If you’re comfortable with a home repair, DIY can save on labor but requires appropriate tools and safety protocols.
Buying tips and options
Choosing where to buy and what to buy can affect both price and reliability. Here are common avenues:
- OEM GM dealers or GM parts distributors for factory-authorized units
- National auto parts chains (e.g., AutoZone, O'Reilly, Advance) for aftermarket or remanufactured modules
- Online retailers and marketplaces (e.g., RockAuto, retailer-specific sites) offering a range of brands and price points
When shopping, compare part numbers to ensure you’re getting the correct in-tank pump module for your Sierra’s engine and configuration, and consider warranty terms and inclusions (seals, sending unit, guide rings, etc.).
Summary
For a 2013 GMC Sierra, the fuel pump part typically ranges from about $60 to $450, with total installed costs commonly between $360 and $1,000 depending on labor rates and whether you choose an OEM, aftermarket, or remanufactured module. Engine choice and exact part inclusions influence the price, and labor costs vary by shop and complexity. Always verify part numbers and inclusions, shop around for quotes, and weigh DIY installation against professional service.