Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

How much is a fuel pump for a 2013 Chevy Impala?

For a 2013 Chevy Impala, the fuel pump replacement typically costs between $60 and $420 for the part itself, with installed prices ranging roughly from $350 to $900 depending on whether you choose OEM or aftermarket parts and the labor rate in your area.


Part price ranges


Prices vary by whether you select OEM-equivalent parts, aftermarket units, or salvaged components. The ranges below reflect common market prices as of 2024–2026 and assume an in-tank fuel pump module (the standard setup for this model).



  • OEM/new fuel pump module (in-tank, includes sending unit): typically $180–$420.

  • Aftermarket or remanufactured fuel pump module: typically $60–$260.

  • Used or salvaged units from a yard: typically $40–$120.


The part you choose can significantly influence the total, and compatibility with your specific Impala trim and VIN is essential. Always verify part numbers before purchase.


Labor costs and installation


Installation costs depend on how long the job takes and the shop’s hourly rate. The following ranges cover typical scenarios for a 2013 Impala.



  • Typical replacement time: 2–4 hours, depending on access and trim level.

  • Labor rate: $75–$150 per hour in many regions; higher in major metro areas.

  • Estimated installed labor cost: roughly $150–$600.


Some shops may add a diagnostic or shop fee, and additional costs can apply if related components or wiring need replacement.


OEM vs aftermarket considerations


Choosing between OEM and aftermarket parts can affect price, warranty, and perceived reliability. OEM parts often come with longer warranties and guaranteed compatibility, but aftermarket options can offer substantial savings while still meeting specifications. Check warranty terms and return policies when shopping.


Warranty and installation tips


Ask about the warranty on both the part and the labor. A reputable shop should warranty the labor for a set period and provide documentation of the pump part’s warranty. Have the fuel system inspected for leaks or fuel smell after installation, and consider replacing the fuel filter if it hasn’t been changed recently.


Where to buy and how to compare offers


Prices can vary widely between dealers, big-box auto parts retailers, and independent shops. It’s wise to obtain multiple quotes, confirm vehicle compatibility with your exact Impala’s VIN, and ask about included components (sending unit, filter, clamps) to compare apples-to-apples.


Summary


The cost to replace the fuel pump on a 2013 Chevy Impala includes both parts and labor and varies based on part choice (OEM vs aftermarket versus used) and the shop’s rates. Expect part costs from roughly $40 to $420, with total installed prices commonly ranging from about $350 to $900. Planning ahead, verifying compatibility, and shopping around for quotes can help you secure a fair price and reliable warranty on the repair.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.