For a 2000 Jeep Cherokee, a new in-tank fuel pump module typically costs about $80 to $260 for the part, with total installed prices commonly ranging from roughly $250 to $500 depending on labor rates and location.
The 2000 Cherokee uses an in-tank fuel pump module that includes the pump and sending unit. Replacement options vary by brand, whether you buy a complete sending unit or a pump-only unit, and whether the part is new, remanufactured, or OEM. Prices can differ significantly between dealers, local shops, and online retailers, so it pays to compare quotes and confirm compatibility with your VIN.
Parts options and price ranges
When shopping for a fuel pump for this vehicle, you’ll typically encounter a few common options. The list below explains these choices so you can compare what’s available.
- OEM Mopar fuel pump module (new, in-tank, with sending unit)
- Aftermarket fuel pump module (brands like Airtex, Bosch, Delphi, Carter, etc.)
- Pump-only unit vs whole sending-unit assembly
- Remanufactured or rebuilt units
Prices vary by source and by whether the unit includes the sending unit and fuel level sensor. Always verify compatibility with your vehicle’s VIN and engine code before purchasing.
Where to buy and typical prices by source
Prices can differ based on where you shop. The following ranges reflect common current pricing from major outlets and online retailers.
- Retail parts stores (AutoZone, O'Reilly, Advance Auto): typically $120–$260 for an in-tank module, with Mopar OEM options often at the higher end.
- Online retailers and auto parts distributors (RockAuto, NAPAonline, dealer websites): aftermarket modules commonly $60–$200; OEM/Mopar options around $140–$260.
- Local shops and dealership service departments: parts may be marked up, and total installed price often ranges from about $300 to $500 or more depending on labor rates.
Labor costs are separate from the part price. Installing an in-tank pump usually requires dropping the fuel tank, which can take about 1.5 to 3 hours depending on access and vehicle condition. Rates vary by region; always request a full quote that includes parts, labor, and tax.
Installation considerations
Labor time and complexity
Replacing the fuel pump on a 2000 Cherokee is moderately labor-intensive because it often requires tank access. Expect 1.5–3 hours of labor in a typical shop, more if the tank is difficult to access or if there are additional fuel system issues.
Safety and warranty
Disconnect the battery, relieve fuel system pressure, and follow proper handling procedures to avoid fire hazards. Check warranty terms on aftermarket pumps; some manufacturers offer 1–2 year warranties on parts, with conditions tied to installation method and diagnostics.
Summary
Prices for a 2000 Jeep Cherokee fuel pump depend on whether you choose an aftermarket or OEM unit, and whether you purchase a full sending unit or a pump-only module. Expect part costs in the $60–$260 range and total installed prices typically between $250 and $500, influenced by labor rates and regional differences. Always confirm compatibility with your VIN, consider whether you want a new or remanufactured unit, and obtain a full, itemized estimate before proceeding.
Final takeaway
Shop around across retailers, online outlets, and local garages to compare parts and install quotes. If you’re comfortable with DIY work and have the proper tools, you can lower total costs, but ensure you follow safety procedures and verify the exact part fitment for your 2000 Jeep Cherokee.