Replacements for a Buick Verano engine typically run from a few thousand dollars to well over that, depending on engine type and sourcing. Since the Verano was discontinued in the U.S. after 2017, new factory engines are scarce, so most buyers rely on used or remanufactured units plus labor and related parts.
Engine options that powered the Verano
The Buick Verano lineup in the United States used two primary engines during its production window: a naturally aspirated 2.4-liter Ecotec and a 2.0-liter turbocharged option for the Verano Turbo. The following summarizes these configurations and what they mean for replacement considerations.
- 2.4-liter Ecotec inline-four (gasoline) — about 180 horsepower; used in standard Verano models from 2012–2016.
- 2.0-liter turbocharged inline-four — about 250 horsepower; used in the Verano Turbo variants from 2013–2016.
Availability depends on the model year and prior configuration, so replacement options often come from salvage yards or remanufactured programs rather than new production lines.
Cost breakdown: engine replacement price ranges
Prices below reflect typical quotes in the United States as of 2024–2026 and can vary by region, mileage, and condition. They cover the engine unit itself, not installation labor or ancillary parts.
- Used engine (2.4L): roughly $800–$1,800
- Used engine (2.0L turbo): roughly $1,200–$2,500
- Remanufactured long block (2.4L): roughly $2,000–$3,500
- Remanufactured long block (2.0L turbo): roughly $3,400–$5,000
Labor and installation time add to these figures, as do parts such as gaskets, timing components, water pump, and fluids. Always obtain a full estimate that itemizes parts and labor before proceeding.
Labor and additional costs
A typical engine replacement labor bill can range from about $700 to $1,500, depending on shop rates and the complexity of the job. Expect to add several hundred dollars for gaskets, seals, belt/chain timing components, water pump, oil, and filter, plus disposal fees for the old engine.
Some projects require wiring harness checks or replacements, additional sensors, and potential warranty considerations, all of which can push the total cost higher. Always request a written estimate that breaks out parts, labor, and any core charges.
Where to source a Verano engine
There are several avenues for finding a Verano engine, each with its own risk and reward profile. The following are common sources for the powerplant substitution process.
- GM OE remanufactured programs through authorized dealers
- Independent auto parts retailers offering remanufactured engines
- Salvage yards and online marketplaces listing used Verano engines
- Specialty engine rebuilding shops that offer core exchange or rebuilt units
When shopping, verify engine compatibility with your VIN, confirm any warranty terms, and compare multiple quotes. A thorough inspection or compression test on a used engine can help prevent future surprises.
Summary
For a Buick Verano, the cost to replace the engine depends heavily on the engine type (2.4L vs 2.0L turbo), whether you use a used or remanufactured unit, and the labor rate at the shop. With the Verano no longer in production in the U.S. since 2017, expect to source engines from salvage yards or remanufacturers, and anticipate total installed costs typically ranging from roughly $3,000 to $7,000, depending on specifics. Always compare several sources, confirm warranties, and factor in labor and ancillary parts when budgeting.