Prices for a brake caliper on a 2010 Ford Fusion typically range from about $40 to $350 per caliper, depending on front or rear position and whether you choose remanufactured, aftermarket new, or OEM parts. Labor and related parts add to the total if you’re having a shop install them.
In practice, the cost you actually see is influenced by part type, brake configuration for your specific vehicle, and where you buy the part. Some 2010 Fusions may have rear brakes that use drums instead of calipers, in which case no brake caliper would be required for that axle. Always confirm the exact brake setup for your VIN before shopping.
Price ranges by caliper type
Caliper prices differ by whether they're front or rear and by the source (remanufactured, aftermarket, or OEM). Here are typical ranges to expect.
Front brake calipers
Front calipers are the most commonly replaced due to wear on the front brakes.
- Remanufactured front caliper: approximately $40–$120
- New aftermarket front caliper: approximately $70–$200
- OEM Ford front caliper (new): approximately $150–$350
Front calipers tend to be more expensive when bought new in OEM form, while remanufactured options offer substantial savings with warranty in many cases. Always verify compatibility with your exact vehicle configuration.
Rear brake calipers
Rear caliper pricing applies if your Fusion uses rear disc brakes; if your rear brakes are drum-type, there is no rear caliper to replace.
- Remanufactured rear caliper: approximately $40–$120
- New aftermarket rear caliper: approximately $70–$180
- OEM Ford rear caliper (new): approximately $150–$320
As with the front, the rear caliper price varies by source and whether you choose remanufactured, aftermarket, or OEM parts. Check the exact part number for your model to ensure proper fit.
Labor and additional costs
Beyond the caliper itself, installation and related components influence total cost. The following ranges reflect common figures for the United States as of recent years.
- Labor to replace one caliper per axle: roughly $100–$250, depending on shop rates and vehicle access
- Brake pads and rotor considerations: if worn, adding new pads and possibly rotors can add $100–$300 per axle
- Core charges: remanufactured calipers may include a refundable core charge (often around $15–$50)
- Taxes, disposal fees, and shop variables may affect final price
Prices for labor and add-ons vary by region, shop, and whether other brake components also need replacement. Getting a multi-point quote can prevent surprises at the counter.
Where to shop
Reliable sources to compare prices include both brick-and-mortar and online retailers. Start with well-known auto parts stores and check cross-reference options to confirm compatibility with your exact Fusion model and trim.
- AutoZone, Advance Auto Parts, O'Reilly Auto Parts
- RockAuto (online retailer with multiple brands)
- NAPA Auto Parts
- Ford dealers or authorized parts distributors for OEM options
Always verify the part number, confirm fit for your VIN, and review warranty terms before purchase. If you’re unsure about which caliper to order, a quick call to the retailer with your VIN can help ensure you buy the correct part.
Summary
The cost of a brake caliper for a 2010 Ford Fusion varies widely based on whether you need front or rear calipers, and whether you choose remanufactured, aftermarket, or OEM parts. Expect roughly $40–$120 for remanufactured, $70–$200 for aftermarket, and $150–$350 for OEM front calipers; rear calipers follow a similar pattern but may not apply if your car uses rear drums. Labor typically adds $100–$250 per axle, with additional costs for pads, rotors, and potential core charges. Checking multiple retailers and confirming compatibility with your VIN will help you get an accurate, up-to-date quote.
Bottom line: shop around, verify exact fit, and plan for both part cost and installation when budgeting for brake caliper replacement on a 2010 Ford Fusion.
How much are calipers for a Ford Fusion?
The average price for a 2020 Ford Fusion Brake Caliper at Advance Auto Parts is around $95.04, with a range that starts at $7.99 and goes up to $342.99. With 12 options in stock from 4 trusted brands, finding the right fit is easy.
What's the best oil for a Ford Fusion?
Recommended Oil Specifications for Ford Fusion Engines
| Engine | Recommended Oil |
|---|---|
| 2.0L EcoBoost I4 (2013-2020) | SAE 5W-30 Full Synthetic |
| 2.5L Duratec I4 (2010-2020) | SAE 5W-20 Full Synthetic |
| 2.7L EcoBoost V6 (Fusion Sport, 2017-2019) | SAE 5W-30 Full Synthetic |
| 2.0L Hybrid / Plug-in Hybrid | SAE 0W-20 Full Synthetic |
How much does one brake caliper usually cost?
A single caliper can cost up to $130 and several will reach prices even higher. A complete brake repair that includes pads, rotors, and calipers typically averages between $200 and $800 depending on the vehicle and parts used.
How much is a caliper for a 2010 Ford Fusion?
The average price for a 2010 Ford Fusion Brake Caliper at Advance Auto Parts is around $100.22, with a range that starts at $5.49 and goes up to $363.99. With 11 options in stock from 3 trusted brands, finding the right fit is easy.