Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

How much is a 2010 Camry engine?

Replacing a 2010 Camry engine typically runs from about $1,000 to $6,000, depending on engine type and source; most buyers pay between $2,000 and $4,000 including labor, with higher costs if you choose a new OEM unit or a V6.


Engine options for the 2010 Camry


The 2010 Camry offered two engine choices. Price guidance varies by which engine you’ll replace. Here are the two configurations you’ll likely encounter.



  • 2.5-liter four-cylinder engine (2AR-FE): common in base models and higher fuel economy trims.

  • 3.5-liter V6 engine (2GR-FE): available on higher trims, delivering more horsepower and torque.


Note that the four-cylinder engines are generally cheaper to replace than the V6 due to part costs and market demand.


Typical price ranges for a replacement engine


Prices vary by whether you buy used, remanufactured, or new, and whether installation is included in the quote. The following ranges reflect typical market prices as of 2024–2026.



  • Used engine (long block): typically $800–$1,800 depending on mileage and condition. The 2AR-FE four-cylinder engines tend to be on the lower end, while rarer configurations may be higher.

  • Remanufactured/rebuilt engine: generally $1,900–$3,500 for the long block, plus core charges and gaskets. This option provides refreshed internals with a warranty.

  • New OEM engine (Toyota or equivalent): commonly $3,500–$6,000 for the engine alone, with labor bringing total installed cost to roughly $4,500–$8,000 or more depending on shop rates and ancillary work.


Labor costs for an engine replacement typically run $75–$150 per hour, with total shop time often 6–12 hours or more depending on the vehicle, access, and whether ancillary work is required (such as replacing the timing belt/chain, water pump, or radiator).


Shop smart: how to get an accurate quote


To get precise pricing, contact local auto parts retailers, salvage yards, and repair shops. Ask for the engine (long block) price, complete engine price with any needed accessories, the labor estimate, core charge, and warranty terms. Verify compatibility with your VIN and any warranty constraints.


Summary


In sum, replacing a 2010 Camry engine can cost anywhere from about $1,000 to more than $6,000, influenced by engine type (4-cylinder vs V6), source (used, remanufactured, or new), and installed labor. For many owners, a used or remanufactured long block offers a balance of cost and reliability, while a new OEM engine carries the highest price but potentially the longest life.


For current pricing, shop around and request formal quotes to compare total installed costs, including any required ancillary work and warranties.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.