The 2000 Honda Accord coupe with the 3.0-liter V6 delivers about 240 horsepower, with peak torque around 212 lb-ft. This rating comes from the factory specification for the V6-equipped coupe, typically paired with either a 5-speed manual or a 4-speed automatic transmission.
Engine power at a glance
In 2000, Honda rated the 3.0-liter V6 at roughly 240 horsepower around 6,000 rpm, with torque peaking near 5,000 rpm. The figure is the official rating for the V6 coupe and serves as a benchmark for performance within that generation, though minor variations can occur by market or production run.
How horsepower is measured
Power figures for the 2000 Accord were provided using SAE net horsepower measurements, reflecting output after drivetrain losses. The V6 is a 3.0-liter engine designed to deliver strong mid‑range response and highway performance, with a broad torque curve to assist acceleration across a range of speeds.
Power, torque, and transmission choices
The V6 was offered with two transmissions: a 5-speed manual or a 4-speed automatic. The official 240 hp rating generally applies to both configurations, though peak torque can vary slightly due to transmission gearing and drivetrain losses.
Impact on drive and handling
With 240 hp, the coupe aimed for confident acceleration and highway pass‑through capability, aligning with Honda’s emphasis on smooth, usable power. The two-door chassis combined with the V6’s power band provided a notably stronger mid‑range than the four-cylinder variants of the same generation.
Maintenance notes for owners and buyers
When evaluating a used 2000 Accord coupe V6, check for maintenance history, including timing belt/chain condition, coolant health, and overall engine wear. While the factory rating remains 240 hp, real-world output can be affected by fuel quality, intake/exhaust condition, and component wear. A well-documented service history helps ensure the engine continues to deliver its original performance.
Summary
The 2000 Honda Accord coupe V6 is commonly cited as delivering 240 horsepower and about 212 lb-ft of torque from its 3.0-liter V6, with transmission choices that included a 5-speed manual or a 4-speed automatic. This combination gave the coupe solid, road-ready performance for its era, while remaining a practical, reliable daily driver with proper maintenance.