The Dodge Dakota with the 3.7-liter V6 typically makes 210 horsepower.
The 3.7L V6, part of Chrysler's PowerTech family, was used in Dakota pickups during the mid-to-late 2000s and into the model's final years. It reliably delivered about 210 horsepower and roughly 235 lb-ft of torque. Exact figures can vary slightly by model year and the rating standard used (SAE net versus older gross ratings), but 210 hp is the commonly cited figure for most Dakotas with this engine.
Engine basics and where it appears
The 3.7-liter V6 was introduced to provide a balance of power and efficiency in mid-size trucks like the Dakota. It sits between the smaller four-cylinder options and larger V8 alternatives in the Dakota lineup, offering a practical blend of capability for everyday driving and light hauling.
Performance figures
Key power details for the 3.7L V6 in Dakota models are summarized below.
- Horsepower: 210 hp
- Torque: 235 lb-ft
These figures represent the typical output reported for the Dakota variants equipped with the 3.7L V6, spanning several model years. Exact numbers can vary slightly depending on year, tuning, and the rating standard used by the manufacturer.
Practical considerations
In everyday use, the 210-horsepower rating translates to modest acceleration and adequate towing for a mid-size pickup from that era. Owners often note that torque comes on strong enough for at-work tasks and highway merging, even if peak figures aren’t as high as some V8 rivals.
Summary
In short, the 3.7L V6 Dodge Dakota typically delivers 210 horsepower, with torque around 235 lb-ft. While these numbers are representative across most years, small variations can occur due to year-by-year tuning and rating standards. For a precise figure, check the vehicle’s certified documentation or VIN-specific data.