The Honda CB Shine 125 typically requires about 0.9 to 1.0 liters of engine oil for a full oil change, with the exact amount depending on whether you replace the oil filter during the service.
This article outlines the typical capacity, explains why the number can vary by year and market, and covers the recommended oil grades and service considerations to keep the bike running smoothly.
Oil capacity and service scenarios
Two common service scenarios
Before listing the typical capacity figures, it helps to distinguish between changing oil with or without replacing the oil filter. The CB Shine 125’s total oil needed can differ slightly based on whether you install a new filter at the same time.
- 0.9 L: Oil change without replacing the oil filter (drain, refill, and top up to the correct level).
- 1.0 L: Oil change with a new oil filter installed (extra oil to fill the filter and engine passages).
Conclusion: Start with about 0.9 L when performing an oil change, then top up in small increments and check the level. If you replace the filter, expect to use closer to 1.0 L in total.
Recommended oil grade and service considerations
Choosing the right oil grade and following appropriate service intervals helps maintain engine health for the CB Shine 125. The bike is a common daily commuter and benefits from oil that holds viscosity under typical city riding conditions.
Note that specifications can vary by market and model year. Use this as a guide and consult your owner's manual for your exact year and region if in doubt.
- Oil grade: SAE 10W-30 or 10W-40, API SL/SM/SN or higher; JASO MA2 is recommended for motorcycles with a wet clutch. You may choose synthetic or mineral oil depending on climate, riding conditions, and budget.
- Oil capacity and change interval: About 0.9–1.0 L per oil change. A typical change interval is roughly every 4,000–6,000 km under normal riding, or as specified in the Honda service schedule for your market. In hot climates or heavy-city use, follow the shorter end of the range.
Conclusion: Use the recommended oil grade and follow the official service schedule to keep the CB Shine 125 performing well. For precise year/market requirements, refer to the manual or your local Honda dealer.
Summary
For the Honda CB Shine 125, plan for about 0.9 to 1.0 liters of engine oil per oil change, depending on whether you replace the oil filter. Use a 10W-30 or 10W-40 oil (API SL or higher, with JASO MA2 recommended for wet-clutch models) and follow the service interval indicated in your manual. Always verify the exact capacity for your bike’s year and market and fill carefully to the correct level.