On a 2018 Chevy Silverado 1500, replacing a wheel bearing (typically the front wheel hub assembly) generally costs about $300 to $650 per wheel, depending on parts and labor. If you need both front wheels, budget roughly $600 to $1,300; rear bearings, if applicable, may cost less per wheel but vary by setup.
Wheel bearings on this model are most commonly replaced as hub assemblies on the front wheels. Prices vary by shop, region, and whether the replacement is performed by a dealership or an independent mechanic. The following sections break down what drives cost, typical price ranges, and tips to save.
What affects the cost
Prices are shaped by the specific job and vehicle configuration. The main factors are:
- Front vs rear bearing replacement: Front hubs are the more common service on the Silverado 1500 and typically priced differently from rear bearings.
- Part type: A complete wheel hub assembly (hub with bearing and sensors) is usually costlier than a bare bearing kit, but can reduce labor time.
- Labor rate and shop type: Dealerships typically charge higher labor rates than independent shops.
- Vehicle specifics: 2WD vs 4WD, ABS sensor presence, and whether the tone ring or sensor must be replaced.
- Geographic location: Local wage rates and demand affect pricing inflations.
- Additional repairs: If the axle, CV joint, or brake components are related to the failure, the job may require extra parts and labor.
Understanding these factors helps when evaluating estimates from different shops and deciding whether to replace one side or both sides in a single visit.
Typical price ranges
What you actually pay for a wheel bearing replacement includes both parts and labor. The figures below assume a standard front hub assembly replacement on a single wheel; multiply by two for both sides, and adjust for rear bearings if applicable.
- Front wheel bearing hub assembly replacement on one wheel: about $300 to $650
- Front wheels on both sides: about $600 to $1,300
- Rear wheel bearing replacement on one wheel (less common on this model): about $250 to $600
- Rear wheels on both sides: about $500 to $1,200
- Dealership vs independent shop: dealer quotes often run higher; independent shops may be 10%–50% less depending on region
Pricing can be influenced by whether the work is performed under warranty or if the vehicle has aftermarket parts installed, and whether a special tool is required for pressing bearings.
Ways to save and what to ask
To keep costs reasonable, consider these strategies when obtaining quotes and scheduling the work.
- Get multiple quotes from independent shops and dealerships; ensure the estimate covers the same parts (hub assembly vs bearing kit) and labor scope.
- Ask for a written estimate that itemizes parts and labor, and check whether taxes, disposal, and any shop supplies are included.
- Request a warranty on parts and labor; many shops offer 12-24 months.
- If both sides show wear, replacing in pairs can save time and future labor costs if you plan to keep the truck longer.
Summary: The cost to replace wheel bearings on a 2018 Silverado 1500 typically ranges from roughly $300 to $650 per wheel for a front hub assembly, with higher prices at dealerships and in regions with higher labor rates. Replacing both front wheels can bring the total into the $600 to $1,300 range, while rear bearings follow a similar pattern but are less common. Always compare quotes and confirm exactly which parts are included.