The cost to replace an exhaust pipe on a Honda CR-V generally ranges from about $200 to $900 for a single pipe and up to roughly $1,700 for a full exhaust run with parts and labor. The exact price depends on which section needs replacement, whether aftermarket or OEM parts are used, and local labor rates.
Exhaust piping on a CR-V can refer to several components, including the front/downpipe, mid-pipe, and tailpipe. Prices vary by model year and shop, and some jobs may involve additional components like the catalytic converter or resonator. The following sections break down typical costs and practical considerations.
What counts as an exhaust pipe on a Honda CR-V
In CR-Vs, the exhaust system is a series of connected pipes that channel exhaust gases from the engine to the tail. A repair can involve replacing just one section or the entire run, depending on rust, damage, or leaks. Replacing a single pipe is usually cheaper than renewing the whole system, but labor is a major part of the bill. Here is what to expect for different sections.
Note: This section describes typical cases; your vehicle's year, trim, and condition will shape the exact quote.
Cost ranges for CR-V exhaust pipe replacements (parts + labor)
Below are typical cost ranges you can expect for common exhaust pipe replacements on a CR-V. These figures combine parts and labor and reflect average shop prices in the United States. Your local prices may vary.
- Front pipe / downpipe replacement: typically $200–$500 for parts, plus about $80–$180 for labor, for a total range of roughly $280–$680.
- Mid-pipe replacement (between catalytic converter and muffler): typically $150–$400 for parts, plus about $100–$250 for labor, for a total range of roughly $250–$650.
- Rear pipe / tailpipe replacement: typically $100–$350 for parts, plus about $60–$150 for labor, for a total range of roughly $160–$500.
- Full exhaust pipe replacement (all pipes in one go): typically $400–$1,000 for parts, plus about $200–$500 for labor, for a total range of roughly $600–$1,500.
Prices vary by year, model, and region, and high-mileage CR-Vs with rust may require additional work like hanger replacement or clamps, which can add to labor time and cost.
Factors that influence price and tips to save
Several factors influence the final bill, and shoppers can take steps to save without compromising safety or warranty compliance.
- Location and shop rates: Urban and higher-cost regions typically charge higher hourly labor rates.
- Parts choice: Aftermarket parts are often cheaper than OEM parts; some shops charge more for OEM replacements.
- Extent of damage: Rusted pipes, clamps, hangers, or a damaged catalytic converter can increase labor time.
- Do you need one pipe or the whole system: Replacing a single section is cheaper than a full system replacement.
- Damage discovery during service: If multiple leaks are found, you may need multiple replacements; ask for a line-item estimate before work begins.
To save money, compare quotes from multiple shops, ask for itemized estimates, consider reputable aftermarket parts, and inquire about warranties on parts and labor. Some shops offer a maintenance or replacement package that includes a visual inspection and rust prevention advice.
How to get an accurate quote and what to expect
When seeking quotes, be prepared with your vehicle's year, trim, mileage, and a description of symptoms (noise, rust, exhaust smell). A shop will typically inspect the exhaust system, identify the exact pipe to replace, and provide an itemized estimate that lists parts and labor separately. Typical labor time ranges from about 1–3 hours for a single pipe and 3–6 hours for a full replacement, depending on access and corrosion.
Summary
Replacing an exhaust pipe on a Honda CR-V involves a range of costs that depend on the exact pipe being replaced, parts choice, and labor rates. Expect a single-pipe replacement to run in the low hundreds of dollars, while a full exhaust replacement can reach well into the thousands. Always obtain multiple quotes, verify that components are appropriate for your model year, and consider the long-term value of OEM versus aftermarket parts. Regular maintenance and rust prevention can also extend exhaust life and reduce the likelihood of costly replacements.