For a Silverado, expect roughly $150–$350 for a single caliper including parts and labor; front calipers are typically pricier than rear. Replacing two calipers on the same axle is about double, and all four calipers across both axles can push the total above $1,000.
Costs vary by model year (1500 vs. 2500 HD), trim, and local labor rates. The choice between remanufactured and new OEM-style calipers, plus whether you replace rotors or pads at the same time, also influences the final price. The breakdown below outlines typical ranges and common scenarios.
What affects the price
Several factors determine the final bill, from the type of caliper to the condition of related brake components and the shop's labor rate. The main variables are:
- Caliper type: remanufactured unit vs. brand-new OEM or high-quality aftermarket. Remanufactured calipers are cheaper but may carry shorter warranties; new OEM units are more expensive but preserve original specifications and warranties.
- Front vs. rear: Silverado front calipers are generally more expensive due to larger size and braking load; rear calipers are usually cheaper.
- Rotor/pad condition: if rotors are worn or warped, many shops include rotor resurfacing or replacement and new pads, adding to the cost.
- Auxiliary parts and services: new brake hoses, hardware, brake fluid flush, and any ABS or sensor work add to the bill.
- Labor rate and location: urban or high-cost areas push labor charges higher; rural shops tend to be lower.
Considering these factors helps you compare quotes and understand what you’re paying for on a Silverado caliper replacement job.
Cost ranges for caliper replacement on a Silverado
The following ranges reflect typical pricing for parts and labor as of 2024–2026, assuming standard brake setups and common maintenance practices. Exact prices vary by year, model (1500 vs 2500 HD), and local rates.
- Remanufactured caliper (per unit): part typically $60–$180. Labor to install is usually $80–$150 per caliper. Total per caliper roughly $140–$330.
- New OEM or reputable aftermarket caliper (per unit): part typically $200–$500. Labor to install is about $80–$150 per caliper. Total per caliper roughly $280–$650.
- Two calipers on a single axle (both sides): double the per-caliper total. Roughly $280–$660 for remanufactured setups, or $560–$1,300 for new OEM/aftermarket calipers on that axle.
- All four calipers (both front and rear axles): typically in the range of $1,000–$2,500, depending on parts choice and whether rotor/pad replacement is included.
Note: Rotors and pads are commonly replaced with caliper work if they are worn or damaged, which adds to the overall cost. Always request an itemized quote that separates parts, labor, and any ancillary services.
Cost considerations by scenario
These scenarios help you budget for common repair paths. The figures below are ballpark estimates and depend on your vehicle’s specifics and local rates.
- Single caliper replacement (one caliper on one wheel): about $140–$330 for reman; $280–$650 for new OEM/aftermarket.
- Front axle caliper replacement (both front calipers on the axle): about $280–$660 for reman; $560–$1,300 for new OEM/aftermarket, not including rotor/pads if needed.
- Rear axle caliper replacement (both rear calipers on the axle): about $280–$660 for reman; $560–$1,300 for new OEM/aftermarket, plus rotor/pad if necessary.
- All four calipers (both axles): about $1,000–$2,500 in parts and labor, depending on parts choice and rotor/pad needs.
If a shop quotes a combined price that seems low, it may exclude rotors/pads or additional services; always ask for a detailed, itemized estimate.
Summary
Brake caliper replacement on a Silverado sits in a middle price range for car repairs. Costs depend on whether you use remanufactured versus new OEM calipers, whether you replace one caliper or all four, and whether rotors, pads, hoses, or fluid maintenance are included. Typical ranges are approximately $140–$330 per remanufactured caliper or $280–$650 per new OEM/aftermarket caliper, with axle-wide replacements multiplying the cost. For all four calipers, expect roughly $1,000–$2,500, influenced by vehicle year/model and local labor rates. Always obtain an itemized quote and consider current tire-to-brake needs to determine the full job scope.