Expect to pay roughly $350 to $900 per axle to replace a wheel bearing on a Jeep Compass, depending on front or rear location, the type of part used (hub assembly vs. individual bearing), and local labor rates.
Wheel bearing replacement costs can vary widely based on vehicle configuration, parts chosen, and the shop performing the work. This article breaks down typical pricing, factors that influence the total, and tips for getting an accurate, out-the-door quote for a Jeep Compass.
Cost overview by axle
Prices differ by whether you’re dealing with the front or rear axle, and whether the shop uses a hub assembly or replaces individual bearings. The ranges below reflect common, all-in pricing (parts plus labor) seen in many markets.
Front vs rear pricing considerations
- Front axle wheel bearing hub assembly replacement: typically $350–$800 per axle (parts and labor).
- Rear axle wheel bearing replacement: typically $400–$900 per axle (hub or bearing, depending on design).
Note: If both sides require replacement at the same time, expect roughly double the per-axle cost for parts and labor, though some shops offer a discount for multiple axles.
Factors that influence the price
Several variables beyond front/rear positioning determine the final bill. Understanding them helps set realistic expectations.
Key price drivers
- Part type: hub assemblies (common on newer Compass models) vs individual bearings; hub assemblies are convenient but can be pricier.
- Drivetrain configuration: front-wheel drive (FWD) vs all-wheel drive (AWD/4x4); AWD often entails more labor and sometimes more parts.
- Labor rates by location and shop type (dealership vs independent).
- Part quality: Original Equipment Manufacturer (OEM) vs aftermarket; OEM may cost more but is designed to match factory specs.
- Additional repairs that may be required: damaged ABS sensors, speed sensors, brakes, or corrosion complicating removal.
These factors explain why two shops can quote noticeably different totals for the same vehicle.
Getting a precise quote and planning ahead
To secure an accurate, out-the-door price, it helps to prepare in advance and compare multiple offers.
Steps to obtain an accurate estimate
- Confirm whether the issue is with the front or rear bearing and whether the shop will replace a hub assembly or individual bearings.
- Request multiple quotes from independent shops and from a Jeep dealership to compare pricing.
- Ask for an itemized, out-the-door quote that includes parts, labor, shop supplies, taxes, and any disposal or miscellaneous fees.
- Inquire about whether a wheel alignment is required after bearing replacement and whether it’s included in the quote.
- Check whether both sides or the entire axle are affected, and whether pricing differs for 2WD vs 4x4 configurations.
With a precise quote in hand, you can decide whether to proceed now or wait for promotions on parts or labor.
Summary
Wheel bearing replacement costs for a Jeep Compass generally run about $350 to $800 per axle for front-wheel-drive models and $400 to $900 per axle for rear-wheel-drive configurations, depending on part type and market. AWD/4x4 setups can push costs higher due to additional labor and alignment considerations. Shopping around and obtaining an itemized, out-the-door quote is the best way to avoid surprises.