For a Honda Accord, replacing a wheel bearing typically costs about $400 to $800 per wheel at an independent shop, with dealership quotes often higher.
Wheel bearing replacements on Accords are usually done by replacing the entire hub assembly rather than a simple bearings-only swap. Costs depend on whether the front or rear hub is involved, your vehicle year and generation, the part choice (OEM vs aftermarket), and local labor rates. The following breakdown offers typical ranges and guidance as of 2024–2026.
What you pay to replace a wheel bearing on a Honda Accord
The numbers below reflect common pricing you’ll see from shops in the United States, though prices can vary by region and vehicle condition. The figures assume a wheel hub assembly replacement, which is the standard approach for most modern Honda Accords.
- Front wheel bearing hub assembly replacement: typically $350 to $700 per wheel at an independent shop; $600 to $1,000 or more at a Honda dealership.
- Rear wheel bearing replacement: typically $300 to $650 per wheel at an independent shop; $500 to $900 or more at a dealership.
Note: If a shop quotes a separate bearing replacement without a hub assembly (rare on newer cars), the price could be lower, but many cars require replacing the hub unit to ensure proper fit and ABS sensing.
Factors that influence price
Pricing is not the same everywhere. Several factors determine the final bill, from shop location to the specifics of your Accord's drivetrain.
- Labor rates by region and facility: hourly rates can range from roughly $80 to $150 or more, depending on local market conditions and whether the shop is independent or dealership-based.
- Part choice: OEM (original equipment manufacturer) hub assemblies generally cost more than aftermarket alternatives, though quality varies by brand.
- Position and generation: Front hub assemblies are often more expensive than rear; newer generations may require more complex ABS integration, which can raise costs.
- Inclusion of wheel alignment: Some repairs require an alignment after wheel work, adding $75–$150 to the total.
- Additional service items: If rotors, brakes, or ABS sensors are worn, additional parts and labor may be bundled into the job.
Understanding these factors helps in estimating a price you can trust and in avoiding surprise charges when the work is performed.
How to shop for the service
To secure a fair price and quality work, compare multiple quotes and ask for itemized estimates that separate parts, labor, and any alignment or diagnostic fees.
- Get at least three written estimates from independent shops and, if possible, from a Honda dealer for comparison.
- Ask whether the quote includes a wheel alignment and whether it uses OEM or aftermarket hub assemblies.
- Inquire about warranties on parts and labor, typically 1–2 years or 12,000–24,000 miles for labor and a similar period for parts.
Taking these steps can help you avoid unnecessary costs and ensure the replacement is performed correctly.
What to expect during service
During a wheel bearing/hub replacement, expect the technician to remove the wheel, brake components, and the hub assembly, then install a new hub and rebalance the wheel. A road test and, if needed, an alignment are typically performed to ensure proper handling and safety.
Summary
In short, replacing a wheel bearing on a Honda Accord generally costs $400 to $800 per wheel at an independent shop, with dealer prices higher. Front-bearing hub assemblies tend to be more expensive than rear, and the total cost is influenced by location, part choice, and whether an alignment is required. Shop around for an itemized quote, confirm whether a wheel alignment is included, and check warranties to protect your investment.