In the United States, replacing a wheel bearing on a 2013 Honda Pilot typically costs about $450 to $900 per axle, depending on front vs rear and whether the hub assembly is replaced as a unit or a separate bearing kit.
What affects the price
Several factors influence the final bill beyond the base parts and labor. Understanding these drivers can help you plan and compare quotes.
- Front axle typically costs more than the rear due to more complex hub assemblies and higher labor time.
- Hub assembly vs bearing kit: Many 2013 Pilots use a sealed hub with the bearing pre-installed; replacing the hub assembly is common and generally more expensive than replacing just the bearing.
- Parts quality: OEM/dealer parts tend to be pricier than aftermarket hubs; price ranges often run roughly $100–$350 for a hub, with OEM options sometimes higher.
- Labor rate and shop location: Labor times and hourly rates vary by region; expect about 1.5–3 hours of labor per wheel, with rates commonly ranging from $75 to $150+ per hour in many markets.
- ABS sensor and wiring: If the ABS sensor is integrated in the hub and needs replacement, this can add to the cost.
- Additional repairs: If the hub is seized, corroded, or if related brake components or axle seals require service, costs can rise.
Prices are estimates and can vary widely. Always obtain a written estimate that breaks out parts and labor, and confirm whether a wheel alignment is recommended after replacing a hub.
Cost-saving options
To reduce the bill without compromising safety, consider these strategies.
- Shop around and obtain multiple quotes from independent shops and dealer service departments.
- Ask for a price for aftermarket hubs versus OEM parts and weigh warranties against cost.
- If both front hubs are worn, request a bundled price for replacing both sides to save on labor time.
- Verify whether any related brake work or axle seals are necessary and whether a full inspection is included in the estimate.
Note: The reliability and warranty terms of aftermarket parts can vary; review options carefully before committing.
Summary
For a 2013 Honda Pilot, plan for roughly $450–$900 per axle to replace a wheel bearing, with front hubs typically more expensive than rear hubs due to complexity and higher labor time. Actual costs depend on part choice (OEM vs aftermarket), regional labor rates, and whether additional work is required. Get multiple written estimates and consider bundled pricing if replacing more than one hub.