The wheel bearings on a 2008 Honda Accord are a wear item that can affect ride quality and safety when they wear out. Costs vary based on whether you're replacing a front hub assembly or a rear bearing, the part choice (OEM vs aftermarket), regional labor rates, and whether any additional services are needed.
Typically, replacing a wheel bearing on a 2008 Accord costs between $300 and $700, with front-wheel bearing hub assemblies generally at the higher end of that range. Expect higher numbers in areas with steep labor rates or if extra work or parts are required.
When you shop for a replacement, you should understand what drives the price and what you’re getting for your money. This article breaks down typical costs, scenarios, and budgeting tips to help you plan.
What affects the cost
Costs break down into several categories to help you compare quotes and anticipate the final bill.
- Part type: hub assembly (often sold with the bearing) versus a bearing kit that requires a separate hub and pressing.
- Front vs rear replacement: front-wheel bearings are usually more expensive due to hub assemblies and more complex access.
- OEM vs aftermarket: original equipment parts cost more but may come with longer warranties; aftermarket parts are typically cheaper.
- Labor rate and location: urban shops or dealers tend to charge higher hourly rates than independent shops in smaller markets.
- Pressing and installation requirements: some hubs can be swapped quickly, while others require press fitting or special tools, affecting labor time.
- Additional components: axle nuts, seals, or dust caps may be included or billed separately, increasing the total.
- Wheel alignment: some shops include alignment if steering or suspension work is performed, while others charge separately.
Understanding these factors helps you compare quotes and avoid surprises. If a quote seems unusually high or low, ask for a detailed breakdown of parts, labor, core charges, and any other fees.
Typical price ranges for the 2008 Accord
Below are common estimates you’ll encounter in the United States. Regional differences apply, and prices may vary by shop and part choice.
- Front wheel bearing hub replacement (single wheel): about $300–$700. This typically includes the hub assembly and labor, with higher-end OEM parts costing more.
- Rear wheel bearing replacement (single wheel): about $200–$500. Rear bearings are often cheaper, especially if they’re not part of a larger hub assembly.
- Both front wheels replaced (both hubs): about $600–$1,100, depending on parts and labor rates.
- Additional services (alignment, axle nut, seals): about $50–$150 for an alignment if needed, plus any minor component charges.
Prices shown reflect typical ranges as of 2024–2026 and can vary by region, shop, and the specific part configuration (hub assembly vs separate bearing). Always request an itemized quote that includes parts, labor, any core charges, and potential add-ons.
Budgeting and shopping tips
To ensure you get a fair price and reliable service, keep these tips in mind when shopping for a wheel bearing replacement.
- Get multiple quotes from independents and dealerships to compare parts and labor.
- Ask whether the price includes a hub assembly or a bearing kit and if labor covers any required pressing.
- Inquire about warranties on both parts and labor (many hubs come with a 1–3 year warranty).
- Clarify whether an alignment is included or will be billed separately.
- Consider the long-term value of OEM vs aftermarket parts and the impact on vehicle resale and reliability.
By collecting several quotes and clarifying what’s included, you can avoid surprises and choose a solution that balances cost with reliability.
Summary
For a 2008 Honda Accord, expect a ballpark of $300–$700 for a single-wheel wheel bearing replacement, with front hub assemblies generally costing more than rear bearings. The final price hinges on part type, location, and any needed add-ons such as alignment. Obtain itemized quotes, compare OEM versus aftermarket options, and verify warranty terms to make the best decision.
Can I drive a car with a bad wheel bearing?
No. It is not safe to drive with a bad wheel bearing. A broken wheel bearing can seize, overheat, or even cause the wheel to detach completely.
Is it worth fixing a wheel bearing?
Driving with bad wheel bearings impacts the safety of a vehicle, and it could cause a serious car accident. We do not advise driving on them when they fail and recommend getting them checked out as soon as possible.
What is the most common problem with a 2008 Honda Accord?
Top 2008 Honda Accord Problems
- "No Start" Due to Ignition Switch Failure.
- Check Engine and D4 Lights Flashing.
- Radio/Climate Control Display May Go Dark.
- Faulty Door Lock Actuator May Cause Power Door Locks to Activate Intermittently.
- Warped Front Brake Rotors May Cause Vibration When Braking.
How much to fix a wheel bearing on a Honda Accord?
between $400 and $581
The average cost for a Honda Accord Wheel Bearing Replacement is between $400 and $581.