Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

How much does it cost to replace a water pump in a 2000 Jeep Grand Cherokee?

Typical total prices range from about $300 to $700, depending on engine variant, local labor rates, and whether extra cooling-system parts are replaced. In some markets at dealer or specialty shops, costs can reach around $800 to $1,000.


This article explains the main cost drivers, offers engine-specific estimates for the 2000 Grand Cherokee (4.0L inline-six and 4.7L V8 were available that year), and shares tips for getting accurate quotes and avoiding surprises when replacing the water pump.


What affects the price


The final bill depends on several factors, including which engine you have, the shop’s labor rate, and whether you replace related cooling-system components at the same time. Access to the water pump and any needed gasket or belt work can also influence labor time and price.


Engine variants in the 2000 Grand Cherokee


For 2000 model year Grand Cherokees, buyers could have the 4.0L inline-six or the 4.7L V8. The water pump itself and the surrounding cooling-system layout differ slightly between these engines, which can affect both parts availability and labor time.


Typical cost ranges by engine


Here is a broad estimate range you can expect for a water pump replacement, including parts and labor, at a typical shop:



  • 4.0L I6: Parts roughly $80–$140; labor about 2–4 hours; total around $300–$600.

  • 4.7L V8: Parts roughly $120–$240; labor about 3–5 hours; total around $450–$900.


Prices can vary by region and shop; dealer service tends to be higher than independent shops.


What’s included in the price


Standard pricing typically covers the water pump, a new gasket or seal, coolant, and often a thermostat and belt inspection or replacement if due. Some shops may replace hoses or recommend additional cooling-system maintenance if wear is detected.


DIY vs professional replacement


Replacing a water pump is doable for an experienced DIYer, especially on the 4.0L engine, but it involves significant disassembly and careful reassembly to prevent leaks and overheating. Doing it yourself can reduce costs to parts alone (roughly $60–$150 for a pump, plus minor coolant and gasket costs). Otherwise, expect labor costs to be the main driver of price when hiring a shop.


How to get an accurate quote


To secure a precise estimate, request quotes from several local shops and specify your exact engine variant, whether you want the thermostat replaced at the same time, and whether you want a coolant flush included. Ask for a full parts-and-labor breakdown and any shop-discounted or warranty-covered components.


Summary


For a 2000 Jeep Grand Cherokee, plan for roughly $300–$700 in typical scenarios, with higher-end figures around $800–$1,000 if you’re dealing with dealer pricing or difficult access. The main cost drivers are engine type (4.0L vs 4.7L), local labor rates, and whether additional cooling-system parts are replaced. Getting multiple quotes and confirming what’s included will help you lock in a fair price and avoid surprises.


Bottom line: address a failing water pump promptly to prevent overheating and potential engine damage, and consider replacing related cooling-system components to minimize future service needs.

What are the worst years for the Jeep Grand Cherokee to avoid?


Jeep Grand Cherokee Years to Avoid

  • 2011: Known for higher complaint volume and electrical concerns.
  • 2012: Frequently associated with engine, shifting, and reliability concerns.
  • 2013: Reported issues include electronics and drivetrain complaints.
  • 2014: One of the more commonly discussed years for reliability concerns.



Can I still drive my car with a bad water pump?


Driving with a failing water pump is a gamble. Even if the car seems fine for a few miles, overheating can occur suddenly and without much warning. Once that happens, the damage can begin in minutes.



How many labor hours does it take to replace a water pump?


Generally, replacement takes only 2–3 hours.



How much does it cost to replace a water pump in a 2000 Jeep Cherokee?


The more your engine needs to be disassembled to access the water pump, the higher the labor costs. Taking all these points into consideration, you can expect to pay anywhere from $375 to $787 (including parts and labor).


Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.