The starter replacement for a 2010 Honda Accord typically runs about $300 to $800 in total, depending on the parts you choose and where you get the work done. Dealerships tend to be at the higher end, while independent shops usually offer cheaper options.
In this article, we break down the price components, outline what influences the final bill, and offer tips to save on a starter replacement for this specific model year.
What you can expect to pay
Costs are driven by parts choices, labor rates, and where the work is performed. The ranges below reflect typical U.S. pricing in 2024–2025 for a 2010 Accord with either the 2.4L four-cylinder or the 3.5L V6 engine.
- Remanufactured starter: $120–$260
- New OEM starter: $230–$450
- Used or refurbished starter: $60–$180
Parts choice can swing the total by hundreds of dollars. A remanufactured unit is often a cost-effective middle ground, while a new OEM starter provides factory warranty and longevity but at a higher price.
- Independent shop labor: about 1–3 hours at typical shop rates (roughly $75–$125 per hour), totaling around $75–$375
- Dealership labor: about 1–3 hours at higher dealer rates (roughly $110–$150 per hour), totaling around $110–$450
- Time factors:Most starter replacements take about 1–2 hours, but access can push toward 3 hours if components need extra clearance
Labor costs can substantially affect total pricing, especially if the technician must remove other components or deal with a difficult access route on the engine bay.
- Core charge: typically $0–$50 (refundable when you return the old starter)
- Taxes and shop fees: generally 5–10% of parts and labor combined
- Vehicle-specific factors: engine type (2.4L I4 vs 3.5L V6) and access difficulty can raise or lower labor time
Putting these elements together, a typical total range for most 2010 Accord owners is roughly $300 to $800. If you choose a dealership, expect toward the higher end; independent shops usually offer more competitive pricing, especially with remanufactured parts.
Cost scenarios by service location
Where you have the work done can significantly influence the final price. The following scenarios reflect common pricing patterns in the U.S. as of 2024–2025 for a 2010 Honda Accord.
Independent repair shop
Independent shops often provide the best balance of price and quality. Typical total estimates are:
- Remanufactured starter option: roughly $260–$560 (parts plus labor)
- New OEM starter option: roughly $530–$800 (parts plus labor)
Note: Some shops quote a single out-the-door price that includes both parts and labor; others break it down. Always request a written estimate before authorizing work.
Dealership
Dealership pricing tends to be higher due to factory-supplied parts, diagnostic procedures, and higher labor rates. Typical ranges include:
- Total replacement estimate (remanufactured): about $500–$700
- Total replacement estimate (new OEM): about $650–$900
Dealerships may perform additional checks or related replacements (battery, alternator, drive belt) during the service, which can raise the price.
Do-it-yourself (DIY) considerations
If you have the tools and know-how, you can save on labor by doing the job yourself. This option requires careful attention to safety and proper disposal of parts, but it can cut costs significantly.
- DIY parts cost (remanufactured vs new): roughly $60–$450, depending on part quality and sourcing
- Labor savings: substantial, but not applicable if you lack experience
DIY may reduce total cost but carries the risk of improper installation or missing related issues, so evaluate your skill level and available tools before proceeding.
Summary
For a 2010 Honda Accord, replacing the starter generally costs between $300 and $800, with the exact figure depending on part choice (remanufactured, new OEM, or used), labor rates, and where the work is performed. Independent shops are typically cheaper than dealerships, and DIY options can further reduce costs if you have the necessary skills and tools. Always obtain multiple written estimates, confirm whether core charges apply, and check for any additional diagnostics or related replacements that could be recommended by the shop.