Most drivers pay around $100–$180 for replacing a single radiator hose on a 2015 Dodge Dart. If both hoses need replacement or if the service includes a coolant flush or related cooling-system work, the bill typically ranges from $150–$300. Prices vary by region, shop, and whether OEM or aftermarket parts are used.
Cost components
The total you’re quoted reflects several line items, from the hose itself to labor and any fluids or disposal fees. The following breakdown summarizes what typically drives the price.
Parts costs
- Radiator hose (upper or lower): generally $15–$60, depending on whether it’s a factory OEM part or an aftermarket alternative and the hose’s size and reinforcement.
- Clamps and connectors: often included in the job, but some shops charge $0–$10 if replacements are needed.
- Coolant: typically $10–$25 for a bottle or jug if a full refill is required.
In most cases, parts are a relatively small share of the total cost compared with labor.
Labor costs
- Labor: replacing a radiator hose typically requires 0.5–2 hours of shop time, depending on accessibility and whether one or both hoses are replaced.
- Labor rate: regional variations mean typical shop rates range from about $80–$120 per hour in many areas, though some shops charge more in major cities.
Labor usually accounts for the most variability in the final price, and some shops have minimum charges for small jobs.
Typical price ranges by scenario
Use these ranges as a rough guide. Your actual price will depend on the hose(s) you need, the coolant situation, and your local labor market.
- Single hose replacement (upper or lower) with standard coolant: about $100–$180.
- Both hoses replaced in one visit: about $150–$300.
- Coolant flush or other cooling-system components replaced at the same time (thermostat, water pump, etc.): about $200–$500.
The figures above assume a straightforward hose replacement without additional major repairs; costs can be higher for older cars with more constrained access or in high-cost regions.
Getting an accurate quote
To ensure you’re not overpaying, get multiple, itemized quotes from local shops. Ask for parts and labor separately, and confirm whether coolant, disposal, tax, and shop supplies are included. If you’re not in a rush, you can also check with a trusted independent mechanic versus a dealership, which may charge more for labor but can provide OEM parts and a warranty.
What you can do to save money
Consider these cost-saving tips: compare quotes, ask if refurbished hoses are acceptable, bring your own coolant if the shop allows it, and factor in any multi-service discount. If you’re comfortable, replacing a drain-and-fill hose on a Dodge Dart is not a highly complex job, but it does require proper coolant handling and disposal.
Bottom line: Replacing a radiator hose on a 2015 Dodge Dart is typically a modest repair, with prices driven primarily by labor and region. Planning ahead and shopping around helps you lock in a fair price.
Summary
In brief, expect roughly $100–$180 for a single radiator hose replacement, up to $300 if you replace both hoses or if coolant and other cooling-system work is performed. Get a few quotes, check what’s included, and ensure proper coolant handling and leak testing after the job. A straightforward hose swap is routine for many shops and can prevent bigger cooling problems down the road.