Typically, replacing the power steering pump on a 2015 Chevy Traverse costs about $600 to $1,000, including parts and labor. The exact price depends on parts choices (OEM vs aftermarket), local labor rates, and whether additional components such as belts or hoses must be replaced.
What drives the total cost
The price you pay is shaped by the parts selected and the labor incurred. The following breakdown covers common costs you’re likely to encounter.
- Power steering pump:
- Aftermarket/new or remanufactured: typically $80–$350
- OEM/dealership parts: typically $200–$500
- Reservoir and fittings: $10–$40 for the reservoir; $20–$100 for fittings and hoses
- Serpentine belt (if worn or needed for access): $20–$60
- Power steering fluid: $3–$15
- Possible core charges or shop supplies: $0–$20 (varies by shop)
Prices can vary by region and shop, and additional components may be required if leaks or wear are found elsewhere in the steering system. Always ask for an itemized estimate so you can see exactly what you’re paying for.
Labor costs and time
Labor is a major factor in the total, and the duration can vary based on vehicle access and whether extra parts or steps are involved.
- Estimated labor time: about 2–4 hours in a typical repair
- Labor rates: commonly $90–$150 per hour in many U.S. markets; higher at dealerships or in urban areas, lower at independent shops
- Factors that can increase time and cost: difficult access, seized bolts, or the need to replace related components (such as hoses, lines, or the belt)
- Dealership vs. independent shop: dealers often charge more for labor; independent shops may offer lower rates with either OEM or aftermarket parts
Getting an up-to-date, location-specific quote is essential, since regional labor rates and part prices can swing the total by hundreds of dollars.
Dealership vs. independent shop and DIY considerations
Where you have the work done and whether you tackle it yourself will affect both price and risk. Here are general scenarios to consider.
DIY viability
If you have the tools and experience, doing the replacement yourself can save on labor, but you’ll still pay for the pump, fluids, and any needed fittings. Bleeding the system properly to remove air is crucial to restore steering performance and avoid damage.
Always weigh the time, risk of error, and warranty considerations when deciding whether to DIY or hire a shop.
Professional options
Independent shops typically offer lower hourly rates while providing standard warranties on parts and labor. Dealerships may provide OEM parts and better alignment with factory procedures but usually at a higher cost.
Summary
For a 2015 Chevy Traverse, a typical power steering pump replacement costs roughly $600 to $1,000 at an independent shop, with higher totals possible at a dealership or when OEM parts are used and additional components are required. Expect part costs to range from about $80 to $500 and labor to run about 2–4 hours depending on your locale. Always obtain multiple, itemized quotes and confirm whether fluids, belts, and any related repairs are included in the estimate. If you’re unsure about the best option, consult a trusted mechanic for a diagnosis and personalized quote.