Expect front-wheel hub bearing replacement to run roughly $350 to $700, and rear-wheel bearing replacement to run about $400 to $900, including parts and labor. Prices vary by Nissan model, whether you replace the hub assembly or the inner bearing, local labor rates, and whether you use aftermarket or OEM parts.
Wheel bearings are a critical component that lets each wheel rotate smoothly while supporting the vehicle’s weight. When they wear out, you may hear grinding or humming, or notice play in the wheel. For Nissan models—from compacts like the Versa to SUVs like the Rogue—the exact cost hinges on whether the service is done on the front or rear axle and whether the hub assembly (which often includes the ABS sensor) is replaced as a unit or if only the bearing itself is serviced.
What affects the price
Costs are driven by multiple variables, including the specific Nissan model and year, whether the job is front or rear, the choice of hub assembly vs. inner bearing, the quality of parts (aftermarket vs. OEM), and the local labor rate. The presence of ABS sensors integrated into the hub can also affect both parts and labor costs, since some hubs include the sensor and others require sensor maintenance or transfer.
Below are the common factors that influence the total you’ll pay when replacing a Nissan wheel bearing.
- Front versus rear bearing replacement (front hubs are often more costly due to labor and sensor integration).
- Type of part: aftermarket hub assembly vs. OEM dealer part (OEM parts typically cost more but may come with a longer warranty).
- Labor rate in your region and the shop’s pricing structure (independent shops vs. dealerships).
- Additional services: wheel alignment, ABS sensor handling, or rotor resurfacing may add to the bill.
- Whether the repair is performed on a high-compression engine or a model with limited space, which can affect labor time.
Conclusion: The total price you see will reflect these variables, plus any required inspections or follow-up services recommended after the replacement.
Typical price ranges for Nissan wheel bearing replacement
Front-wheel bearing (hub assembly) replacement costs
Costs for replacing the front hub assembly tend to be higher due to sensor integration and access. The ranges below reflect typical totals from independent shops versus dealership quotes.
- Independent shop (parts and labor): roughly $350 to $700
- Dealership (OEM parts, higher labor rates): roughly $600 to $1,000
- Optional add-ons: ABS sensor handling or replacement ($50–$150) and wheel alignment ($75–$100) if recommended
Conclusion: For most Nissan owners, plan for about $350–$700 at an independent shop, with dealer pricing often higher depending on the model and parts chosen.
Rear-wheel bearing replacement costs
Rear bearings can be less expensive on some models, but many Nissan SUVs and crossovers use rear hubs that are similar in cost to front hubs, especially when an integrated hub is involved.
- Independent shop (parts and labor): roughly $400 to $900
- Dealership (OEM parts, higher labor rates): roughly $700 to $1,200
- Note: If the rear bearing is integrated into the hub, or if an ABS sensor is involved, parts costs may rise and installation time may be longer
Conclusion: Rear wheel bearing replacements typically fall in the $400–$900 range at independents, with dealer quotes often higher depending on the exact model and part choice.
What to expect during the repair
The process usually begins with a diagnostic test to confirm a faulty wheel bearing, often accompanied by a road test and inspection of the ABS sensor. A technician then lifts the car, removes the wheel, brakes, and hub assembly (or the bearing inside the hub), and replaces it with a new hub assembly or bearing kit. After reassembly, many shops perform a wheel alignment if necessary and test-drive the vehicle to verify smooth operation and proper ABS function.
How to save money
To keep costs down while ensuring quality, consider these tips.
- Get quotes from multiple reputable shops, including at least one independent shop and one dealership.
- Ask about aftermarket hub assemblies versus OEM parts and compare warranties.
- Request a diagnosis first to confirm that the bearing is the only issue and that no additional rotor or brake work is required.
- Confirm whether a wheel alignment is included or will be extra, and factor in any potential ABS sensor handling costs.
- Check for coupons or seasonal promotions that some shops offer for brake and bearing work.
Conclusion: Shopping around, understanding the part options, and asking about inclusions (alignment, sensor work, disposal fees) can help you land a fair price without compromising safety.
Summary
Replacing a Nissan wheel bearing is a mid-range repair that varies by model, location, and part choice. Expect about $350–$700 for front hub replacements at independents and $600–$1,000 at dealerships, with rear replacements generally $400–$900 at independents and higher at dealers. The exact cost hinges on whether the hub assembly or inner bearing is replaced, whether the ABS sensor is integrated, and the local labor rate. Always obtain multiple quotes, confirm included services, and consider warranty coverage when choosing parts and shops.