The cost typically ranges from about $120 to $1,000, depending on whether the CR-V uses a standalone inline filter or an in-tank fuel pump module. Location and labor rates also affect the total.
For many Honda CR-V generations produced since the mid-2000s, the fuel filter is part of the fuel pump module inside the tank and is not readily replaceable as a separate unit. Some older models used a replaceable inline filter in the fuel line.
What drives the price
Several factors influence how much you’ll pay to replace a CR-V fuel filter, including filter configuration, parts availability, and labor rates. The following outlines the main cost drivers.
Two main configurations affect cost. Here is a quick guide:
- Inline/ external fuel filter: This is a separate filter in the fuel line. Parts typically cost $20-$60, labor is around $60-$120, for a total of roughly $80-$180.
- In-tank fuel pump module: The filter is integrated with the fuel pump inside the tank. Parts for the pump module usually run $200-$500 (OEM or aftermarket), with labor around $150-$350. Total cost commonly $350-$850, though some jobs reach $900-$1,000 or more.
Note: In many CR-V generations, a standalone filter is not serviceable; replacing the filter may require replacing the entire fuel pump module.
Model-year and configuration specifics
Here’s how the CR-V’s fuel filtration setup tends to vary by era and generation:
- Older CR-V models (late 1990s to early 2000s) often used a replaceable inline fuel filter. Typical total replacement cost: about $100-$250, depending on labor rates and part pricing.
- Most newer CR-Vs (mid-2000s to present) use an in-tank fuel pump module with a non-serviceable filter. Replacement costs are higher, commonly in the $500-$1,000 range, with dealer quotes sometimes higher.
Prices vary by region, shop, and whether you go with a dealer or an independent mechanic. Always request a written estimate that includes parts and labor and confirms whether the filter replacement involves only the filter or the entire pump module.
DIY vs professional replacement
For inline filters, some handy car owners can perform the replacement with basic tools in about an hour. When the filter is inside the fuel tank, most owners opt for professional service due to the need to access the tank, handle fuel safely, and replace the pump module if required.
Summary
Summary: The cost to replace a fuel filter on a Honda CR-V depends heavily on the generation and how the filter is configured. Inline filters are usually cheaper to replace (roughly $80-$180), while in-tank pump modules that include the filter can push total costs into the $350-$1,000-plus range. Always verify your specific year’s setup and obtain quotes from multiple shops to account for regional labor rates.


