Most Hyundai Tucson owners pay roughly 100 to 350 USD to replace a camshaft position sensor, including parts and labor. Higher costs can occur at a dealership or in regions with higher labor rates.
What affects the price
Prices can vary based on the sensor type, where you have the work done, and the specific engine in your Tucson. The following factors commonly influence the final bill:
Parts cost and sensor type
The camshaft position sensor itself can be aftermarket or OEM. Aftermarket sensors are usually cheaper, while OEM sensors ( Hyundai-branded) tend to be more expensive but are designed to match the original part exactly.
Labor rates and shop type
Vehicle year, engine, and accessibility
Different Tucson generations and engines have varying access to the sensor. Some layouts allow a quick replacement, while others may require more disassembly, increasing labor time.
The cost breakdown below reflects typical ranges you might see in North America as of 2024–2025. Prices can differ by country, city, and individual shop policies.
Cost components you’re likely to encounter:
- Sensor price (OEM vs aftermarket): roughly 15–150 USD depending on brand and whether it’s Hyundai OEM.
- Labor time and rate: roughly 0.5–2 hours at about 60–150 USD per hour, depending on region and shop type.
- Diagnostic or shop fees: some shops include a diagnostic fee or blend it into labor if you proceed with the repair.
- Taxes and any applicable disposal or environmental fees: vary by location.
- Potential auxiliary costs: if the failure has caused related wiring damage or if additional seals/gaskets are needed, prices can rise.
Overall, most customers see a total near the 100–350 USD range, with dealer quotes sometimes higher, especially in premium markets or for newer model years.
What to expect during service
Understanding the typical steps can help you prepare for the service and avoid surprises at the shop.
- Diagnosis to confirm the fault with a camshaft position sensor-related code (often P0335 or P0340/P0341 type codes, depending on the exact sensor and system).
- Parts selection: decide between OEM and aftermarket parts, and confirm if any additional parts are needed.
- Replacement procedure: access the sensor, unplug the electrical connector, remove the old sensor, install the new sensor, and reconnect wiring.
- System test: clear codes and perform a road test to ensure proper operation and that the check-engine light stays off.
- Final verification: confirm no new codes appear and provide maintenance recommendations if related issues were identified.
Note: If a failing camshaft position sensor has contributed to misfires or other engine issues, some shops may advise additional checks or services, which can add to the total cost.
Saving money on a camshaft position sensor replacement
Here are legitimate ways to keep costs reasonable without compromising safety or reliability.
- Consider aftermarket sensors that meet or exceed OEM specifications to reduce part costs.
- Shop around for quotes from multiple independent shops, especially if you’re not tied to a dealership.
- Ask for a bundled price that includes diagnostic work and the replacement, rather than paying separately for each service.
- Schedule during slower periods or request a written estimate before any work starts.
- If your vehicle has extended warranties or coverage that includes engine sensors, check whether the repair might be covered.
By understanding these factors and obtaining multiple estimates, you can secure a fair price for replacing the camshaft position sensor on your Hyundai Tucson.
Summary
The camshaft position sensor replacement in a Hyundai Tucson generally falls in the 100–350 USD range, with variability driven by sensor type (OEM vs aftermarket), labor rates, engine layout, and regional costs. Expect the service to include diagnosis, part replacement, testing, and a road test, with potential extra charges for diagnostics or related repairs. Always request a written estimate and compare quotes from a few shops to ensure you’re getting a fair price.