On a typical 2013 Honda Civic, replacing a wheel bearing or hub assembly on one wheel usually costs about $300 to $800, depending on whether you’re serviceing the front or rear axle and whether you replace just the bearing or the complete hub assembly. Local labor rates and whether you go through a dealership or an independent shop have a big impact on the final price.
Wheel bearings are mounted inside the wheel hub and are essential for smooth rotation and steering. In many Civics from this era, the front wheel bearing is part of a hub assembly that may include the ABS sensor; some shops offer bearing-only service, but most repairs use a full hub unit for reliability and speed. Costs vary by wheel position, part choice, and regional labor rates, so getting multiple quotes is wise.
What affects the price
Several factors influence the final bill. The most decisive are the part type and inclusions, the wheel position (front vs rear), and the shop’s labor rate. Below is a quick breakdown of how these elements commonly affect price.
- Front wheel bearing hub assembly replacement (one wheel): typically $300–$800 total. Parts often run about $150–$350, with labor around $150–$350; front work may include wheel alignment and ABS sensor considerations.
- Rear wheel bearing replacement (one wheel): typically $250–$600 total. Parts often run about $60–$200, with labor around $150–$400; rear jobs sometimes require less disassembly but can still vary by vehicle design.
- Dealership vs. independent shop: dealerships tend to price higher, often by $50–$200 per wheel, while independent shops usually offer lower labor rates but may have longer turnaround times.
- Parts choice: OEM (factory) hub assemblies tend to be more expensive than aftermarket equivalents, but some buyers prefer OEM for fit and warranty; aftermarket parts are typically cheaper but vary in quality.
- Additional components or services: new brake components, ABS sensor wiring, or wheel alignment after a front-end bearing replacement can add $50–$150 or more to the bill.
Considerations after the list: If you need both front wheels replaced, or if the shop discovers additional worn components (brake rotors, calipers, CV joints), the cost will rise accordingly. Always ask for a separate quote for parts and labor, and whether an alignment is included or billed separately.
Budgeting tips and getting a quote
To ensure you receive an accurate estimate and avoid surprise charges, use these steps when contacting shops:
- Ask whether the quote is for a hub assembly replacement or a bearing-only replacement, and whether it includes the ABS sensor if applicable.
- Request a per-wheel price and ask if a wheel alignment is included in the front-wheel scenario.
- Inquire about OEM vs aftermarket parts and the warranty on both parts and labor.
- Check if the quote covers additional inspections and any potential required repairs to related components (brakes, CV joints, suspension).
- Get at least two or three written estimates, and confirm valid warranty terms before authorizing work.
Concluding: With price ranges in mind and a clear understanding of what each quote includes, you can compare options effectively and choose a repair plan that fits your Civic’s needs and your budget.
Summary
For a 2013 Honda Civic, plan for about $300–$800 to replace a single wheel bearing on one wheel, with front-wheel jobs generally on the higher end and rear-wheel jobs often lower. Expect higher totals if you replace front and rear hubs, if OEM parts are preferred, or if an alignment and ABS-related work are required. Always obtain multiple quotes, confirm inclusions (parts, labor, alignment, warranty), and consider whether you want OEM or aftermarket components.
Bottom line: accurate pricing depends on location, shop, and exact part configuration, so getting several written estimates is the best way to ensure you’re paying a fair price for a safe, durable fix.
Can I drive a car with a bad wheel bearing?
No. It is not safe to drive with a bad wheel bearing. A broken wheel bearing can seize, overheat, or even cause the wheel to detach completely.
How much to replace wheel bearing 2013 Honda Civic?
between $315 and $510
The average cost for a Honda Civic Wheel Bearing Replacement is between $315 and $510. Labor costs are estimated between $242 and $355 while parts are priced between $73 and $156. This range does not include taxes and fees, and does not factor in your unique location.
Is it worth fixing a wheel bearing?
Driving with bad wheel bearings impacts the safety of a vehicle, and it could cause a serious car accident. We do not advise driving on them when they fail and recommend getting them checked out as soon as possible.
Can a 2013 Civic make it 300,000 miles?
With proper maintenance, a Honda Civic can last between 200,000 and 300,000 miles. Many owners have reported reaching well beyond that range. The key to long life? Routine maintenance, timely repairs, and a bit of care in your driving habits.