Usually, Honda dealers charge about $600–$1,000 per axle for a brake pads and rotors replacement, and roughly $1,200–$1,800 for replacing brakes on both axles, depending on your model and location.
Beyond the headline price, the exact quote depends on the specific Honda model (Civic, Accord, CR-V, Pilot, etc.), rotor size and hardware, and whether you opt for original equipment parts or aftermarket options. Dealership labor rates are generally higher than those at independent shops, and some dealers offer fixed-price brake service packages.
Typical dealer pricing for Honda brake jobs
Prices below reflect common ranges you’ll see at authorized Honda service centers in the United States for a standard brake job that includes pads and rotors on one axle, based on typical pricing in 2024–2025. Actual quotes can vary widely by model, location, and whether rotors need replacement or can be resurfaced.
- Front brakes (pads and rotors) per axle: roughly $600–$1,000, depending on model and parts chosen (OEM vs aftermarket). This covers parts, labor, and basic disposal fees.
- Rear brakes (pads and rotors) per axle: roughly $500–$850, depending on model and parts chosen.
The figures above are estimates intended to capture typical dealer pricing. Your actual quote will depend on the specific Honda model (e.g., Civic or CR-V), rotor size and hardware, regional labor rates, and whether you opt for original equipment parts or aftermarket equivalents.
Costs for both axles
When replacing brakes and rotors on both axles, dealers typically quote a combined price that reflects a discounted or packaged rate compared with doing two separate single-axle jobs. This will usually fall in the range below, but can be higher for premium models or all-wheel-drive configurations.
- Both axles (pads and rotors installed): roughly $1,000–$1,900, depending on the model, parts choice, and local labor rates.
Keep in mind that some dealer packages may include rotor resurfacing instead of replacement if rotors are within spec. In cases where rotors are badly worn, warped, or below minimum thickness, replacement is required to restore braking performance.
What affects price
Several factors influence final cost: the specific Honda model, rotor size, whether you replace or resurface rotors, the type of pads, the inclusion of brake fluid flush, and regional labor rates. OEM parts tend to be pricier than aftermarket equivalents, but may offer warranty advantages or performance characteristics Honda dealers emphasize.
Tips to save money
Consider getting multiple written quotes from Honda dealers and reputable independent shops. Ask for a fixed-price brake service package. If rotors are still within spec and only pads need replacement, you may save by choosing pads-only service or rotor resurfacing, when recommended by the technician.
Summary
Brake and rotor replacements at Honda dealerships typically fall in the $600–$1,000 per axle range for pads and rotors, and $1,200–$1,800 for both axles. Prices vary by model, location, and components chosen; always obtain a written quote that itemizes parts and labor, and consider comparing dealer vs independent shop prices. Regular maintenance helps ensure braking performance and longevity.
Bottom line: For the most accurate estimate, contact your local Honda dealer with your model and VIN, or request quotes from nearby reputable shops to compare parts options (OEM vs aftermarket) and any included services (like a brake fluid flush).