For a 2007 Chevy Impala, the power steering pump part price typically ranges from about $150 to $600, and the total installed cost, including parts and labor, generally falls between $300 and $900. Actual prices vary by source, region, and whether you choose a remanufactured unit, a new aftermarket part, or an OEM GM replacement.
What drives the price
Prices aren’t fixed and depend on several factors. The following elements largely determine what you’ll pay for the pump and the job:
- Part type (remanufactured vs. new vs. OEM)
- Brand and supplier (GM/OEM vs. aftermarket)
- Inclusions (reservoir, pulley, hoses, fittings) and compatibility with your engine
- Core charges or refunds associated with remanufactured units
- Labor rates and shop location
- Warranty terms and return policies
Because engine bays and access points vary, labor time can also swing pricing significantly from one shop to another.
Cost breakdown and typical ranges
Here’s a practical guide to the dollar figures you’ll encounter when shopping for the part and the labor to install it:
- Remanufactured power steering pump: roughly $140–$260
- New aftermarket pump: roughly $180–$320
- New OE/GM pump: roughly $350–$520
- Core charge (if applicable): about $0–$60
- Labor to install: about 1.5–3 hours, depending on access and vehicle condition
- Labor rate: commonly $75–$120 per hour, varying by region
In practice, a full installation that includes hoses, belts, and potential related components can push the total toward the higher end of the range, especially at shops in areas with higher labor costs.
Vehicle- and shop-specific considerations
When shopping, consider your Impala’s specific engine (the 2007 model could have different V6 options) and whether the pump you choose includes a reservoir and pulley. Some shops quote labor separately if additional steering-system components show wear, while others quote a bundled price.
Shopping tips and considerations
To avoid surprises and get the best value, keep these guidelines in mind when researching prices:
- Confirm exact compatibility for your engine variant and trim level
- Check whether the reservoir, pulley, hoses, and fittings are included
- Ask about the core charge and whether it’s refundable when you return your old unit
- Look for a clear warranty on both the pump and the installation (typical coverage is 1–2 years for parts)
- Obtain a written estimate that separates parts and labor and notes any necessary belt or related part replacements
Comparing quotes from at least two or three shops or retailers can reveal meaningful savings, and reading customer reviews can help identify reliable service providers for this specific job.
Install considerations and signs of failure
Common signs that you may need a new power steering pump include whining or groaning noises when turning, stiff or difficult steering at low speeds, visible fluid leaks, and a drop in power steering fluid level. If you notice discolored or burnt-smelling fluid, address the issue promptly to limit damage to the steering rack and related components.
Summary
For a 2007 Chevy Impala, expect the pump itself to cost roughly $150 to $600, with installed prices typically ranging from $300 to $900 depending on whether you choose remanufactured, aftermarket, or OEM parts and on local labor rates. Always verify compatibility with your engine, confirm what’s included with the pump, and request a detailed quote that separates parts from labor. Shopping around and choosing a reputable shop can help you balance cost with long-term reliability.
Conclusion
In short, prices vary widely, but informed buyers can navigate the market by focusing on part type, inclusions, warranty, and labor estimates. With the Impala’s aging power steering system, a careful price check now can prevent unexpected costs later.