In brief, replacing the fuel pump on a 2012 Honda Accord typically costs about $600 to $1,000 installed, with part prices ranging from roughly $150 to $500 depending on OEM vs aftermarket and engine option.
This cost can vary by location, whether the pump is OEM or aftermarket, whether the fuel tank needs to be dropped for access, and whether related components (such as the sending unit, fuel filter, or fuel pressure regulator) are replaced at the same time. The following sections break down part price ranges and typical labor costs to give you a clearer budget.
Part price ranges for the 2012 Honda Accord fuel pump
Prices shown reflect common options from OEM dealers and major aftermarket suppliers as of 2026.
- OEM Honda fuel pump assembly (for 2012 Accord, 2.4L I4 or 3.5L V6): $350–$520
- Aftermarket fuel pump module (e.g., Delphi, Dorman, Spectra Premium, Airtex): $150–$320
- Refurbished/remanufactured fuel pump: $120–$240
Prices vary by retailer, warranty terms, and whether the unit is sold as a full pump module or a standalone sending unit. Always verify compatibility with your exact engine variant and confirm what is included (gasket, sending unit, and mounting hardware) before purchasing.
Labor and total installed cost
Labor costs depend on shop rates and how easily the fuel tank can be accessed. The following ranges help illustrate typical budgeting for a standard 2012 Accord replacement.
- Typical labor time: 2–5 hours (2–4 hours for a straightforward four-cylinder model, longer if access is difficult or if the V6 version is involved)
- Labor rate: $75–$150 per hour, depending on the region and the shop
- Estimated labor cost: $150–$750
- Estimated total installed cost (parts + labor): roughly $600–$1,000 for most cases; in some cases, especially with higher labor rates or additional needed components, totals can approach $1,200 or more
To avoid surprises, obtain a written estimate that itemizes parts, labor, diagnostic fees, and any core charges. Checking multiple quotes can help you land a competitive price, and some shops offer bundled savings if you replace related fuel-system components at the same time.
Do-it-yourself considerations
Safety and preparation
Replacing a fuel pump involves handling the vehicle’s fuel system and potentially dropping the fuel tank. This work requires proper safety procedures, adequate tools, and a solid understanding of vehicle electronics. If you’re not confident in these steps, professional service is recommended.
Skill and tool requirements
Expect to disconnect the battery, relieve fuel system pressure, safely raise and support the vehicle, drain or support the tank, and disconnect electrical connections and hoses. A proper reseal and testing of the system are also important to ensure safe operation after installation.
Summary
For a 2012 Honda Accord, most customers find the total installed cost to fall in the $600–$1,000 range, though regional pricing, engine variant, and choice of OEM vs aftermarket parts can push the total higher or lower. Always verify part compatibility, warranty terms, and whether related components are included in the replacement kit. Getting multiple quotes can help you secure a fair price and avoid unexpected charges.


