Front strut assemblies for a 2013 Toyota Corolla typically run about $60-$350 per strut if you buy aftermarket or OEM parts; installed, expect roughly $300-$700 per front axle, depending on brand, labor rate, and whether you replace both sides or just one. Note that the Corolla’s rear suspension uses shocks, not struts, on most trims.
Prices and availability can vary by region and retailer, and choosing OEM versus aftermarket parts also affects the total cost. This article lays out typical ranges for front struts, what influences the price, and practical tips for shoppers.
Front struts: price ranges
Before listing the common price bands, it helps to distinguish between part types and brands. The following ranges reflect typical U.S. market prices for 2013 Corolla front struts (per strut, installed prices vary by retailer and whether you buy a full assembly or just the cartridge).
- Aftermarket front strut assemblies (per strut): approximately $60–$260
- OEM Toyota front strut assemblies (per strut): approximately $180–$350
- Premium or performance brands (per strut): approximately $250–$500
Replacing both front struts on a single axle (left and right) will double these per-strut prices. The values above refer to the parts themselves; installation costs are separate and vary by shop.
Labor and total installed cost
Labor costs depend on the shop, region, and how long the job takes. Replacing both front struts on the Corolla typically requires about 1.5 to 3 hours per axle at most shops, with hourly rates ranging from discount shops to dealer level.
- Independent auto shop: roughly $100–$300 per axle for labor
- Dealership: roughly $200–$350 per axle for labor
- Mobile or budget/service centers: roughly $80–$180 per axle for labor
To estimate a ballpark installed cost for the front pair:
- Aftermarket pair (parts) plus labor: about $270–$970 per front pair
- OEM pair (parts) plus labor: about $480–$1,150 per front pair
Prices shown are typical ranges and can vary by location, promotions, and supplier. Always confirm exact pricing with the seller and the installer before purchasing or committing to service.
What to consider when buying
Several factors influence your choice and total cost:
- Vehicle condition and mileage: worn bushings or mounts may require additional parts during replacement.
- Full‑assembly vs. cartridge replacement: full assemblies are often easier and faster to install, but cost more upfront.
- OEM vs. aftermarket: OEM parts typically offer exact fit and warranty alignment with Toyota standards but cost more; aftermarket options can save money and offer longer warranties in some cases.
- Warranty and return policy: check whether parts are covered and for how long, as this affects the long-term value.
Before committing, compare quotes from multiple shops, verify what the price includes (parts only vs. labor and disposal fees), and consider whether you want to address related components (strut mounts, bearings) at the same time.
Where to shop and what to buy
Good starting points for price checks include major auto parts retailers, the manufacturer’s official parts site, and reputable suppliers known for Toyota compatibility. When shopping, verify that the part is designed for a 2013 Corolla and matches your trim and suspension configuration. Reading user reviews and checking warranty terms can also help you pick a reliable option.
Summary
For a 2013 Toyota Corolla, expect front strut assemblies (both sides) to cost roughly $120–$700 for parts, with labor bringing the installed price per front pair into a broad range of about $270–$1,150 depending on brand and shop. OEM parts are usually at the higher end, while aftermarket options offer savings with varying warranty terms. Prices vary by region and retailer, so it pays to compare multiple quotes and confirm what is included in each estimate.
Summary of key takeaways
- Front struts are the primary concern for 2013 Corolla front suspension; rear suspension uses shocks, not struts.
- Parts price ranges per strut: aftermarket $60–$260, OEM $180–$350, premium $250–$500.
- Installed cost per front pair commonly falls roughly in the $270–$1,150 range, depending on parts choice and labor rates.
- Shop around, compare warranties, and consider related components (mounts, bearings) to avoid repeated labor later.